Refer to the TOYOTA Repair Manual for each work procedure.
PROCEDURES NECESSARY WHEN CABLE IS DISCONNECTED/RECONNECTED TO BATTERY TERMINAL
| Necessary Procedure | Effect or Inoperative Function when Necessary Procedure is not Performed |
|---|---|
| Correction of steering angle neutral point | Calibration |
After the battery is reconnected, be sure to wait 10 seconds or more before attempting to start the engine. The engine may not start immediately after the battery is reconnected.
w/ Navigation System:
After the engine switch is turned off, the navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the engine switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.