Home › Vehicle Exterior › BODY PANEL › QUARTER PANEL(for 5 Door)
BM27T0E _01 Vehicle Exterior _054380 BODY WELD POINT _0267626 QUARTER PANEL(for 5 Door) F

BODY WELD POINT  QUARTER PANEL(for 5 Door)  ASSEMBLY REPLACEMENT  


K125773

REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108826

Cut with Disc Sander etc.
K108828

Cut Location for Supply Parts

K125823

K125824C02
0.271,0.344 0.583,0.5 0.313,0.156 10 false *A 0.396,4.688 0.708,4.844 0.313,0.156 10 false *B
*A LH *B RH



INSTALLATION


Symbol Meaning
K108821

Spot Weld
K108823

Plug Weld
K108831

Butt Weld
K108834

Body Sealer

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

Before installing a new part, apply body sealer.

HINT:

Apply body sealer evenly about 5 mm (0.20 in.) from the flange, avoiding any oozing.

Apply body sealer evenly, about 3 to 4 mm (0.12 to 0.16 in.) in diameter.


4.

After welding, apply the foamed sealing material to the corresponding parts. (See the painting / coating)

5.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

6.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K125825C02
5.469,6.677 5.969,6.24 5.969,6.24 5.385,7.292 false 4.281,8.146 4.552,7.49 false 4.167,4.24 4.385,4.427 0.219,0.188 10 false *A 4.167,4.448 4.375,4.677 0.208,0.229 10 false *B 6.01,6.104 6.323,6.26 0.313,0.156 10 false *1 4.208,8.177 4.521,8.333 0.313,0.156 10 false *2 6.625,8.469 6.938,8.677 0.313,0.208 10 false *a 1.135,5.906 1.667,6.125 0.531,0.219 10 false 5 (0.20)
*A LH *B RH
*1 Rivets *2 Fuel Filler Opening Lid
*a mm (in.) - -


K125826C02
0.375,0.417 0.688,0.573 0.313,0.156 10 false *A 0.479,4.792 0.792,4.948 0.313,0.156 10 false *B
*A LH *B RH