Home › Engine / Hybrid System › 1KD-FTV (ENGINE MECHANICAL) › ENGINE UNIT › 2015.06–2020.08
NM27T0E _51 Engine / Hybrid System _053579 1KD-FTV ENGINE MECHANICAL _0260104 ENGINE UNIT UN GENERAL/CONTROL/DETAILS F

1KD-FTV ENGINE MECHANICAL  ENGINE UNIT  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The 1KD-FTV TOYOTA Direct injection 4 stroke common-rail Diesel engine (D-4D) is an in-line 4-cylinder, 3.0-liter, 16-valve DOHC, turbocharged diesel engine with intercooler. This engine uses the direct injection system and common-rail system to achieve high performance, clean emissions, low noise and low vibrations.



SPECIFICATION


No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve, DOHC, Belt and Gear Drive
Manifolds Cross-flow
Fuel System Common-rail Type
Displacement 2982 cm3 (182.0 cu. in.)
Bore x Stroke 96 mm x 103 mm (3.78 in. x 4.06 in.)
Compression Ratio 17.9 : 1
Max. Output (EEC) EURO 4 127 kW @ 3400 rpm
Except EURO 4 120 kW @ 3400 rpm
Max. Torque (EEC) EURO 4 410 N*m @ 1600 to 2800 rpm
Except EURO 4 400 N*m @ 1600 to 2800 rpm
Valve Timing Intake Open 2° BTDC
Closed 37° ABDC
Exhaust Open 45° BBDC
Closed 0° ATDC
Firing Order 1 - 3 - 4 - 2
Fuel Cetane Number 48 or higher
Emission Regulation*1 EURO 4
EURO 3
EURO 2
-
Engine Service Mass*2 M/T 261 kg (575 lb)
A/T 251 kg (553 lb)

*1: Emission regulations differ by country and region.

*2: Weight shows the figure with oil and water fully filled.



MAIN FEATURES


a.

This engine has been able to achieve the following performance through the use of the items listed below:

i.

High performance and fuel economy


ii.

Low noise and vibration


iii.

Lightweight and compact design


iv.

Good serviceability


v.

Clean emissions

Item (1) (2) (3) (4) (5)
Engine Proper A cylinder head cover made of plastic is used. - - ○ - -
A cylinder head made of aluminum alloy is used. - - ○ - -
A piston provided with combustion chamber is used. ○ - - - ○
An injector is provided in the bore center to improve its air utilization rate. ○ - - - ○
A passage for the EGR is provided in the cylinder head. - - - - ○
Valve Mechanism An intake camshaft is driven by a timing belt, and an exhaust camshaft is driven by a gear. - ○ ○ - -
An automatic tensioner is provided for the timing belt. - - - ○ -
Cooling System Toyota Genuine Super Long Life Coolant (SLLC) is used. - - - ○ -
Intake and Exhaust System A diesel throttle valve is used. - ○ - - ○
A three-stage switching type swirl control valve is used. ○ ○ - - ○
A variable nozzle vane type turbocharger is used. ○ - - - ○
An intercooler is used. ○ - - - ○
EGR cooler with bypass is used.*1 - - - - ○
Fuel System An HP3 type supply pump is used. ○ ○ ○ - -
A common-rail type fuel injection system is used. ○ ○ - - ○
An injector is provided in the bore center. ○ ○ - - ○
Compensation values and Quick Response (QR) codes are used. ○ ○ - - ○
A fuel cooler is used. ○ - - - -
A fuel heater is used.*2 ○ - - - -
A fuel filter warning switch that detects the clogging of the fuel filter is used.*3 - - - ○ -
Serpentine Belt Drive System A serpentine belt drive system is used. - - - ○ -
Engine Control System An intake mass air flow meter is used. ○ - - - ○
Non-contact sensors are used as the accelerator pedal position sensor and diesel throttle valve position sensor. ○ - - - ○
A pilot injection control system is used. - ○ - - ○
A swirl control is used. ○ - - - -
Emission Control System An EGR control system is used.*4 - - - - ○
An oxidation catalyst is used.*4 - - - - ○

*1: Models compliant with EURO 4

*2: Models for South Africa

*3: Except cold area specification models

*4: Models compliant with EURO 2, EURO 3 and EURO 4