Home › Engine / Hybrid System › 1GR-FE FUEL › FUEL SYSTEM
NM27T0E _51 Engine / Hybrid System _053582 1GR-FE FUEL _0260107 FUEL SYSTEM UN GENERAL/CONTROL/DETAILS F

1GR-FE FUEL  FUEL SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


CONSTRUCTION


a.

Fuel Injector Assembly

i.

A 12-hole fuel injector assembly with optimized fuel flow amount is used to improve the atomization of fuel.

W102392E03
2.969,2.458 3.146,2.667 0.177,0.208 10 false A 4.219,1.813 4.458,2.042 0.24,0.229 10 false *a

Text in Illustration
*a View from A - -



b.

Fuel Delivery Pipe Sub-assembly

i.

The fuel delivery pipe sub-assembly is made of plastic to reduce weight.


ii.

The right and left fuel delivery pipes are connected by a nylon tube.


iii.

The pulsation damper is sealed with an O-ring and secured with a holder.

W100648E03
3.594,1.177 3.865,0.635 3.865,0.635 4.521,0.635 true 5.302,1.469 5.375,1.167 5.375,1.167 5.49,1.167 true 2.531,0.5 2.698,0.354 2.698,0.354 2.823,0.354 true 2.188,1.021 2.115,0.594 2.115,0.594 1.99,0.594 true 2,1.042 1.896,0.844 1.896,0.844 1.813,0.844 true 2.115,1.781 2.094,2.094 2.094,2.094 1.958,2.094 true 3.594,1.781 4.146,0.635 true 4.552,0.521 4.844,0.813 0.292,0.292 10 false *2 5.51,1.042 5.729,1.292 0.219,0.25 10 false *5 2.854,0.24 3.083,0.51 0.229,0.271 10 false *1 1.823,0.479 2,0.708 0.177,0.229 10 false *3 1.771,1.979 1.948,2.229 0.177,0.25 10 false *6 1.635,0.74 1.813,0.958 0.177,0.219 10 false *4

Text in Illustration
*1 Holder *2 Fuel Delivery Pipe
*3 O-ring *4 Pulsation Damper
*5 Nylon Tube *6 Pressure Regulator



c.

Fuel Tank

i.

A multiplex layered plastic fuel tank is used for the fuel tank on the models with single fuel tank, and for the main fuel tank on the models with dual fuel tank.


ii.

The multiplex layered plastic fuel tank consists of six layers of four types of materials, and one of those is a recyclable material to address environmental concerns.

W100649E05
3.688,3.875 4.063,3.875 true 3.656,3.469 3.917,3.115 3.917,3.115 4.063,3.115 true 3.635,3.667 3.906,3.396 3.906,3.396 4.063,3.396 true 3.688,3.958 3.938,4.094 3.938,4.094 4.083,4.094 true 3.688,4.083 3.948,4.333 3.948,4.333 4.094,4.333 true 4.052,3.646 3.927,3.646 3.927,3.646 3.667,3.802 true 1.979,3.302 2.188,3.531 0.208,0.229 10 false *a 1.979,4.104 2.188,4.333 0.208,0.229 10 false *b 4.094,3.021 4.313,3.219 0.219,0.198 10 false *1 4.094,3.281 4.302,3.51 0.208,0.229 10 false *2 4.094,3.542 4.302,3.771 0.208,0.229 10 false *3 4.104,3.76 4.313,3.99 0.208,0.229 10 false *4 4.115,3.979 4.323,4.208 0.208,0.229 10 false *3 4.115,4.219 4.354,4.469 0.24,0.25 10 false *1

Text in Illustration
*1 High Density Polyethylene (HDPE) *2 Regrind Material
*3 Adhesive *4 Ethylene Vinyl Alcohol Copolymer (EVOH)
*a Fuel Tank Outside *b Fuel Tank Inside


iii.

On the models with dual fuel tank, a jet pump is provided in the fuel tank in order to automatically transfer fuel from the fuel sub tank to the fuel tank.

·

The fuel from the fuel pump passes through the orifice in the jet pump and returns to the fuel tank. Because the flow speed of the fuel from the fuel pump increases as it passes through the orifice, a vacuum is created near the exit of the orifice. This vacuum causes the fuel to be drawn from the fuel sub tank to the fuel tank.

W102393E02
4.646,0.177 6.865,3.427 2.219,3.25 1.333,1.042 1.49,0.698 1.49,0.698 1.75,0.698 true 1.635,1.677 1.385,1.677 true 1.615,2.76 1.417,2.552 1.417,2.552 1.26,2.552 true 2.135,2.99 2.469,2.844 2.469,2.844 2.594,2.844 true 2.854,1.104 3.031,1.01 3.031,1.01 3.135,1.01 true 2.854,0.708 2.969,0.552 2.969,0.552 3.063,0.552 true 5.427,0.823 5.292,0.708 5.292,0.708 5.177,0.708 true 6.01,0.938 6.177,0.802 6.177,0.802 6.26,0.802 true 6.021,1.854 6.365,1.979 6.365,1.979 6.448,1.979 true 0.719,1.135 0.979,1.333 0.26,0.198 10 false *1 1.792,0.635 2.146,0.885 0.354,0.25 10 false *2 1.177,1.604 1.531,1.854 0.354,0.25 10 false *3 3.104,0.469 3.458,0.719 0.354,0.25 10 false *4 3.135,0.927 3.49,1.177 0.354,0.25 10 false *5 2.646,2.76 3,3.01 0.354,0.25 10 false *7 1.094,2.458 1.448,2.708 0.354,0.25 10 false *6 1.479,3.167 1.833,3.417 0.354,0.25 10 false *8 3.698,3.167 4.052,3.417 0.354,0.25 10 false *9 5,0.646 5.354,0.896 0.354,0.25 10 false *b 6.292,0.708 6.646,0.958 0.354,0.25 10 false *c 6.469,1.896 6.823,2.146 0.354,0.25 10 false *10 5.948,3.188 6.302,3.438 0.354,0.25 10 false *d 4.76,0.302 5.031,0.542 0.271,0.24 10 false *a

Text in Illustration
*1 Engine *2 Return Tube
*3 Main Tube *4 Fuel Inlet
*5 Fuel Filler Pipe *6 Fuel Pump
*7 Jet Pump *8 Main Fuel Tank
*9 Sub Fuel Tank *10 Orifice
*a Jet Pump Cross Section *b From Fuel Sub Tank
*c From Fuel Pump *d To Fuel Tank





OPERATION


a.

Sub Fuel Tank System

i.

The fuel from the fuel pump actuates the jet pump in the fuel tank, in order to draw fuel from the sub fuel tank to the main fuel tank.

W102394E03
2.229,0.833 2.385,0.573 2.385,0.573 2.521,0.573 true 2.542,1.573 2.281,1.573 true 2.531,2.771 2.188,2.563 2.188,2.563 2.042,2.563 true 3.115,2.792 3.573,2.583 3.573,2.583 3.667,2.583 true 1.427,0.927 1.781,1.208 0.354,0.281 10 false *1 2.552,0.479 2.906,0.76 0.354,0.281 10 false *2 2.115,1.49 2.469,1.771 0.354,0.281 10 false *3 1.875,2.469 2.229,2.75 0.354,0.281 10 false *4 2.771,3.333 3.125,3.615 0.354,0.281 10 false *6 5.031,3.323 5.385,3.604 0.354,0.281 10 false *7 3.708,2.49 4.063,2.771 0.354,0.281 10 false *5

Text in Illustration
*1 Engine *2 Return Tube
*3 Main Tube *4 Fuel Pump
*5 Jet Pump *6 Main Fuel Tank
*7 Sub Fuel Tank - -