Home › Engine / Hybrid System › 1KD-FTV (FUEL) › FUEL SYSTEM › 2015.06–2016.08
NM27T0E _51 Engine / Hybrid System _053584 1KD-FTV FUEL _0260109 FUEL SYSTEM UN GENERAL/CONTROL/DETAILS F

1KD-FTV FUEL  FUEL SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


SYSTEM CONTROL


a.

Common-rail System

i.

In this system, the high pressurized fuel supplied by the supply pump is stored in the common-rail, and the ECM sends signals to the injectors via the injector driver in order to control the injection timing and injection volume.

W102286E03
1.885,1.292 1.885,1 1.885,1 1.76,1 true 1.906,1.792 1.906,1.896 1.906,1.896 2.042,1.896 true 1.969,0.5 1.969,0.208 1.969,0.208 1.844,0.208 true 5.167,0.49 5.167,0.219 5.167,0.219 5.292,0.219 true 1.385,1.844 1.271,1.844 true 5.271,2.802 5.063,2.802 true 2.281,2.688 2.229,2.75 2.229,2.75 2.063,2.75 true 2.76,2.479 2.823,2.417 2.823,2.417 2.969,2.417 true 5.021,1.094 5.083,1.042 5.083,1.042 5.25,1.042 true 1.656,0.115 1.885,0.375 0.229,0.26 10 false *1 3.333,0.531 3.563,0.698 0.229,0.167 10 false *2 1.104,1.76 1.292,1.927 0.188,0.167 10 false *4 1.604,0.927 1.833,1.094 0.229,0.167 10 false *5 2.052,1.792 2.24,1.958 0.188,0.167 10 false *6 4.896,2.729 5.083,2.896 0.188,0.167 10 false *7 1.885,3.688 2.073,3.854 0.188,0.167 10 false *8 1.948,4.104 2.198,4.271 0.25,0.167 10 false *10 3.688,3.792 3.938,3.958 0.25,0.167 10 false *11 1.885,2.667 2.083,2.833 0.198,0.167 10 false *a 2.99,2.323 3.24,2.49 0.25,0.167 10 false *b 4.813,4.063 5.063,4.229 0.25,0.167 10 false *12 5.458,3.698 5.708,3.865 0.25,0.167 10 false *13 5.458,4.229 5.708,4.396 0.25,0.167 10 false *14 2.552,3.698 2.74,3.865 0.188,0.167 10 false *9 5.323,0.135 5.552,0.302 0.229,0.167 10 false *3 5.292,0.969 5.542,1.135 0.25,0.167 10 false *c

Text in Illustration
*1 Fuel Pressure Sensor *2 Common-rail Assembly
*3 Pressure Discharge Valve *4 Supply Pump Assembly
*5 Fuel Temperature Sensor *6 Suction Control Valve (SCV)
*7 Injector Assembly *8 Fuel Filter Assembly
*9 Fuel Cooler *10 Fuel Tank
*11 Injector Driver *12 ECM
*13 Crank Position Sensor (NE Signal) *14 Camshaft Position Sensor (G Signal)
*a Fuel (Suction) *b Fuel (Return)
*c Fuel (High Pressure) - -




CONSTRUCTION


a.

Supply Pump Assembly

i.

An HP3 type supply pump is used.

W102287E03
3.531,2.323 3.708,2.531 0.177,0.208 10 false A 3.917,2.125 4.177,2.333 0.26,0.208 10 false B

Supply Pump Specifications
Type HP3
Length A 190.2 mm (7.49 in.)
B 129.0 mm (5.08 in.)
SCV 1
Plunger φ 8.5 mm x 2
Weight 3800 g (8.38 lb.)

HINT:
·

The ECM learns and memorizes the pump discharge volume variances associated with the individual differences in the supply pumps. Therefore, make sure to perform the operation described below after replacing the supply pump. For details, refer to the Repair Manual.

·

Connect a Global TechStream (GTS) to the DLC3 connector and use the GTS to reset the learned value. Alternatively, connect the SST (09843-18040) between the TC and CG terminals of the DLC3 connector, and leave the engine switch on (IG) for approximately 3 minutes to reset the learned value.

·

After resetting, start the engine, allow it to idle* for approximately 1 minute, and turn the engine switch off to enable the engine to memorize the learned value.


*: The engine coolant temperature should be 60°C (140°F) or more, and the fuel temperature should be 20°C (68°F) or more.




ii.

The supply pump consists of an eccentric camshaft, a ring cam, two plungers, four check valves, a Suction Control Valve (SCV), a fuel temperature sensor, and a feed pump.


iii.

The two plungers are placed opposite each other outside of the ring cam.

U170779E03
1.479,1.042 2,0.521 2,0.521 2.198,0.521 true 1.656,2.958 1.219,2.531 1.219,2.531 0.969,2.531 true 2.063,2.844 2.688,3.458 2.688,3.458 2.917,3.458 true 1.74,4.656 2.135,5.042 2.135,5.042 2.354,5.042 true 1.604,4.302 1.188,3.885 1.188,3.885 1.021,3.885 true 2.323,6.688 1.823,6.177 1.823,6.177 1.625,6.177 true 2.323,7.906 1.823,8.417 1.823,8.417 1.625,8.417 true 1.729,7.198 1.333,6.792 1.333,6.792 1.208,6.792 true 2.531,6.469 2.844,6.167 2.844,6.167 2.948,6.167 true 3.021,7.094 3.292,6.823 3.292,6.823 3.417,6.823 true 2.49,7.229 3.302,8.042 3.302,8.042 3.438,8.042 true 5.188,7.271 4.448,6.531 4.448,6.531 4.333,6.531 true 5.479,7.51 6.156,8.188 6.156,8.188 6.354,8.188 true 4.698,3.292 4.188,3.802 4.188,3.802 4.01,3.802 true 5.479,3.438 5.813,3.781 5.813,3.781 6.052,3.781 true 5.25,3.073 6.083,3.073 true 5.552,0.865 6.042,0.375 6.042,0.375 6.229,0.375 true 5.021,1.073 5.021,1.604 true 1.365,0.823 1.885,0.302 1.885,0.302 2.177,0.302 true 2.396,4.958 2.563,5.135 0.167,0.177 10 false *1 1.458,5.875 1.625,6.052 0.167,0.177 10 false *1 1.458,8.552 1.625,8.729 0.167,0.177 10 false *1 0.802,2.438 1.01,2.646 0.208,0.208 10 false *3 1.042,6.719 1.208,6.896 0.167,0.177 10 false *3 2.979,6.073 3.146,6.25 0.167,0.177 10 false *5 6.271,0.292 6.5,0.51 0.229,0.219 10 false *5 3.448,6.729 3.615,6.906 0.167,0.177 10 false *6 6.125,2.979 6.354,3.229 0.229,0.25 10 false *6 6.125,3.688 6.354,3.927 0.229,0.24 10 false *7 3.844,3.708 4.125,3.958 0.281,0.25 10 false *8 3.49,7.958 3.74,8.188 0.25,0.229 10 false *9 4.167,6.438 4.427,6.656 0.26,0.219 10 false *9 2.948,3.385 3.156,3.583 0.208,0.198 10 false *4 3.479,8.24 3.646,8.417 0.167,0.177 10 false *4 6.385,8.104 6.667,8.333 0.281,0.229 10 false *4 2.25,0.438 2.417,0.615 0.167,0.177 10 false *2 2.094,1.49 2.26,1.667 0.167,0.177 10 false *a 4.938,0.177 5.104,0.354 0.167,0.177 10 false *b 4.948,1.594 5.115,1.771 0.167,0.177 10 false *c 2.25,0.188 2.417,0.365 0.167,0.177 10 false *1 0.854,3.802 1.021,3.979 0.167,0.177 10 false *2 1.458,6.104 1.625,6.281 0.167,0.177 10 false *2 1.458,8.323 1.625,8.5 0.167,0.177 10 false *2

Text in Illustration
*1 Check Valve (for Suction) *2 Plunger
*3 Eccentric Camshaft *4 Ring Cam
*5 Check Valve (for Discharge) *6 Feed Pump
*7 Fuel Temperature Sensor *8 SCV
*9 Eccentric Cam Portion - -
*a From Fuel Tank (for Suction) *b To Fuel Tank (for Return)
*c To Common-rail - -



b.

Common-rail Assembly

i.

The function of the common-rail is to store the fuel that has been pressurized by the supply pump.


ii.

The common-rail is provided with a fuel pressure sensor and pressure discharge valve.


iii.

The fuel pressure sensor detects the fuel pressure in the common-rail.


iv.

The pressure discharge valve regulates the fuel pressure. In the pressure discharge valve, the plunger opens and closes in accordance with the actuation signals from the injector driver. Thus, it regulates pressure by releasing excess pressure from the common-rail. In addition, it has a pressure reduction function in case of emergency.


v.

Internally, the common-rail contains a main hole and five branch holes that intersect the main hole. Each branch hole functions as an orifice that dampens the fluctuation of the fuel pressure.

U170780E02
2.104,0.656 1.667,0.219 1.667,0.219 1.177,0.219 true 1.677,0.885 1.427,0.635 1.427,0.635 1.167,0.635 true 2.333,2.604 3.26,2.344 true 2.417,2.802 3.24,2.563 true 2.708,3.031 3.229,2.885 true 4.583,2.688 5.49,2.344 true 4.677,2.823 5.49,2.594 true 4.948,3.031 5.479,2.885 true 5.26,0.896 5.667,0.49 5.667,0.49 5.875,0.49 true 1,0.115 1.208,0.302 0.208,0.188 10 false *1 1.313,1.948 1.521,2.135 0.208,0.188 10 false *a 1,0.542 1.208,0.729 0.208,0.188 10 false *2 5.917,0.438 6.125,0.625 0.208,0.188 10 false *3 3.292,2.24 3.5,2.427 0.208,0.188 10 false *4 3.271,2.49 3.479,2.677 0.208,0.188 10 false *5 3.25,2.802 3.458,2.99 0.208,0.188 10 false *6 5.51,2.25 5.719,2.438 0.208,0.188 10 false *4 5.51,2.49 5.719,2.677 0.208,0.188 10 false *5 5.49,2.792 5.698,2.979 0.208,0.188 10 false *6 1.49,2.24 1.698,2.427 0.208,0.188 10 false *b 3.719,2.24 3.927,2.427 0.208,0.188 10 false *c

Text in Illustration
*1 Common-rail Assembly *2 Fuel Pressure Sensor
*3 Pressure Discharge Valve *4 Orifice
*5 Branch Hole *6 Main Hole
*a Common-rail Cross Section *b Fuel Inlet
*c Fuel Outlet - -
V100135

From Supply Pump
V100136

To Injector Assembly
V100137

To Fuel Tank (Excess Pressure) - -

HINT:
·

The fuel pressure sensor has its sealing portion plastic-deformed in order to keep sealing performance, so do not reuse it after disassembling.

·

If parts that affect the alignment have been changed, make sure to replace the pipe with a new one as well. The parts that require the replacement of a pipe are listed below:

-

Injection pipe: injector, common-rail, and cylinder head

-

Fuel inlet pipe: supply pump, common-rail, cylinder block and cylinder head


·

For details, refer to the Repair Manual.





c.

Injector Assembly

i.

Each injector assembly consists of a nozzle needle, a piston, and a solenoid valve.


ii.

An injector compensation value and a Quick Response (QR) code containing encoded characteristics of the injector are printed on each injector.


iii.

The injector compensation value and QR code contain various pieces of information regarding the injector, such as model code and injection volume correction.

W102289E02
1.729,0.375 1.542,0.188 1.542,0.188 1.385,0.188 true 1.854,0.885 1.542,0.729 1.542,0.729 1.396,0.729 true 1.844,1.885 1.365,1.885 true 1.854,3.313 1.375,3.313 true 5.302,2.25 5.302,2.729 true 6.208,2.052 6.688,2.052 true 1.219,0.052 1.385,0.229 0.167,0.177 10 false *1 1.219,0.646 1.385,0.823 0.167,0.177 10 false *2 1.198,1.802 1.365,1.979 0.167,0.177 10 false *3 1.219,3.24 1.385,3.417 0.167,0.177 10 false *4 5.24,2.74 5.469,2.979 0.229,0.24 10 false *5 6.729,1.969 7.021,2.271 0.292,0.302 10 false *6

Text in Illustration
*1 Injector Assembly *2 Solenoid Valve
*3 Piston *4 Nozzle Needle
*5 QR Code *6 Injector Compensation Value

HINT:
·

If the ECM is replaced, use the Global TechStream (GTS) and input the injector compensation values of all 4 injectors. If the injector is replaced, input the injector compensation value of the replaced injector. Then, the proper compensation will be made so that the injection volume precision prior to the replacement will remain unchanged. For details, refer to the Repair Manual.

·

The QR code, which requires a special scan tool, is not used at TOYOTA dealers.

·

What is Quick Response (QR) Code?

-

QR code, a matrix symbology consisting of an array of nominally square cells, allows omni-directional, high-speed reading of large amounts of data.

-

QR code encodes many types of date such as numeric, alphanumeric, kanji, kana and binary code. A maximum of 7089 characters (numeric) can be encoded.

-

QR code (2D code) contains information in the vertical and horizontal directions, whereas a bar code contains data in one direction only. QR code (2D code) holds a considerably greater volume of information than a bar code.






d.

Fuel Filter Assembly

i.

The cartridge type fuel filter is used.


ii.

Except cold area specification models, a fuel filter warning switch is provided in the fuel filter.


iii.

On the models for South Africa, in order to improve the fuel heating performance, a fuel heater is used.

W102291E02
2.177,0.427 2.26,0.385 2.26,0.385 3.167,0.385 true 1.75,0.542 1.688,0.5 1.688,0.5 1.042,0.5 true 2.292,2.646 3.198,2.646 true 2.688,1.917 3.281,1.917 true 4.917,0.438 5.01,0.396 5.01,0.396 5.917,0.396 true 5.448,0.552 5.885,0.552 true 5.021,2.646 5.917,2.646 true 5.385,1.906 5.99,1.906 true 1.365,0.021 1.625,0.24 0.26,0.219 12 false *A: 4.094,0.021 4.354,0.219 0.26,0.198 12 false *B: 0.865,0.427 1.115,0.635 0.25,0.208 10 false *2 3.219,0.292 3.385,0.458 0.167,0.167 10 false *1 3.26,2.583 3.427,2.75 0.167,0.167 10 false *4 3.344,1.844 3.51,2.01 0.167,0.167 10 false *3 5.927,0.479 6.146,0.74 0.219,0.26 10 false *5 5.938,0.302 6.146,0.49 0.208,0.188 10 false *1 5.958,2.583 6.125,2.75 0.167,0.167 10 false *4 6.042,1.844 6.208,2.01 0.167,0.167 10 false *3

Text in Illustration
*A Except Cold Area Specification Models *B Models for South Africa
*1 Priming Pump *2 Fuel Filter Warning Switch
*3 Filter Cartridge *4 Fuel Sedimenter Level Warning Switch
*5 Fuel Heater Assembly - -



e.

Fuel Tank

i.

On the 5-door models with a spare tire installed on the back door, a dual fuel tank is used.


ii.

On the 5-door models with a spare tire installed on the under floor or 3-door models, a single fuel tank is used.


iii.

On the 5-door models with single fuel tank, a multiplex layered plastic fuel tank is used.


iv.

On the models with dual fuel tank, a multiplex layered main fuel tank is used.

W102292E02
2.969,1.698 2.917,1.469 2.917,1.469 2.813,1.469 true 3.458,1.729 3.365,1.396 3.365,1.396 3.302,1.396 true 3.646,1.885 3.417,2.313 3.417,2.313 3.344,2.313 true 2.063,2.167 1.833,2.594 1.833,2.594 1.76,2.594 true 4.167,1.333 3.844,0.344 3.844,0.344 3.771,0.344 true 4.313,1.396 4.552,0.24 4.552,0.24 4.615,0.24 true 4.875,1.583 4.448,2.417 4.448,2.417 4.354,2.417 true 5.406,2.208 5.219,2.531 5.219,2.531 5.125,2.531 true 5.76,1.031 6.135,0.448 6.135,0.448 6.292,0.448 true 5.49,2.406 5.708,2.406 true 2.646,1.385 2.844,1.594 0.198,0.208 10 false *2 6.323,0.365 6.688,0.646 0.365,0.281 10 false *10 3.156,1.302 3.323,1.469 0.167,0.167 10 false *3 4.656,0.156 4.885,0.354 0.229,0.198 10 false *6 4.198,2.354 4.51,2.604 0.313,0.25 10 false *7 4.979,2.438 5.26,2.656 0.281,0.219 10 false *8 5.729,2.333 6.135,2.552 0.406,0.219 10 false *9 3.198,2.25 3.365,2.417 0.167,0.167 10 false *4 3.594,0.24 3.792,0.49 0.198,0.25 10 false *5 1.604,2.51 1.875,2.719 0.271,0.208 10 false *1

Text in Illustration (5-door Models with Dual Fuel Tank:)
*1 Fuel Filter Assembly *2 Fuel Cooler
*3 Main Tube *4 Main Fuel Tank (Made of Multiplex Layer Plastic)
*5 Return Tube *6 Fuel Pump Filter Assembly
*7 Fuel Filler Hose *8 Fuel Filler Pipe
*9 Fuel Tank Cap *10 Sub Fuel Tank (Made of Steel)

W102294E03
2.906,1.656 2.854,1.438 2.854,1.438 2.76,1.438 true 3.396,1.688 3.302,1.344 3.302,1.344 3.25,1.344 true 3.583,1.854 3.354,2.281 3.354,2.281 3.281,2.281 true 4.052,1.719 3.729,2.5 3.729,2.5 3.656,2.5 true 4.823,1.531 4.396,2.375 4.396,2.375 4.302,2.375 true 5.344,2.167 5.156,2.479 5.156,2.479 5.063,2.479 true 5.438,2.365 5.646,2.365 true 2.021,2.115 1.792,2.542 1.792,2.542 1.719,2.542 true 5.667,2.281 5.958,2.5 0.292,0.219 10 false *8 2.594,1.365 2.76,1.531 0.167,0.167 10 false *2 3.094,1.25 3.26,1.417 0.167,0.167 10 false *3 4.135,2.313 4.302,2.479 0.167,0.167 10 false *6 3.115,2.188 3.313,2.375 0.198,0.188 10 false *4 3.5,2.427 3.781,2.635 0.281,0.208 10 false *5 4.896,2.406 5.063,2.573 0.167,0.167 10 false *7 1.573,2.458 1.74,2.625 0.167,0.167 10 false *1

Text in Illustration (5-door Models with Single Fuel Tank:)
*1 Fuel Filter Assembly *2 Fuel Cooler
*3 Main Tube *4 Fuel Tank (Made of Multiplex Layer Plastic)
*5 Return Tube *6 Fuel Filler Hose
*7 Fuel Filler Pipe *8 Fuel Tank Cap

W102293E02
3.167,1.677 3.115,1.448 3.115,1.448 3.01,1.448 true 3.771,1.656 3.688,1.313 3.688,1.313 3.625,1.313 true 5.229,2.198 5.042,2.51 5.042,2.51 4.948,2.51 true 5.615,0.99 6,0.406 6,0.406 6.156,0.406 true 5.281,2.354 5.49,2.354 true 2.271,2.115 2.042,2.542 2.042,2.542 1.969,2.542 true 3.833,1.646 3.927,1.729 3.927,1.729 3.99,1.729 true 3.479,1.24 3.646,1.406 0.167,0.167 10 false *3 2.865,1.354 3.031,1.521 0.167,0.167 10 false *2 4.01,1.688 4.177,1.854 0.167,0.167 10 false *4 5.531,2.292 5.823,2.531 0.292,0.24 10 false *6 6.198,0.313 6.469,0.594 0.271,0.281 10 false *7 4.781,2.438 5.031,2.635 0.25,0.198 10 false *5 1.833,2.479 2,2.646 0.167,0.167 10 false *1

Text in Illustration (3-door Models:)
*1 Fuel Filter Assembly *2 Fuel Cooler
*3 Main Tube *4 Return Tube
*5 Fuel Filler Pipe *6 Fuel Tank Cap
*7 Fuel Tank (Made of Steel) - -


v.

The multiplex layered plastic fuel tank consists of 6 layers of 4 types of materials.

W100649E06
3.667,3.875 4.042,3.875 true 3.635,3.469 3.896,3.115 3.896,3.115 4.042,3.115 true 3.625,3.635 3.896,3.365 3.896,3.365 4.052,3.365 true 3.688,3.958 3.938,4.094 3.938,4.094 4.083,4.094 true 3.667,4.104 3.927,4.354 3.927,4.354 4.073,4.354 true 4.052,3.646 3.927,3.646 3.927,3.646 3.667,3.802 true 1.99,3.271 2.198,3.5 0.208,0.229 10 false *a 1.979,4.198 2.188,4.427 0.208,0.229 10 false *b 4.083,3.021 4.292,3.25 0.208,0.229 10 false *1 4.104,3.281 4.313,3.51 0.208,0.229 10 false *2 4.083,3.563 4.292,3.792 0.208,0.229 10 false *3 4.094,3.781 4.302,4.01 0.208,0.229 10 false *4 4.115,4.01 4.323,4.24 0.208,0.229 10 false *3 4.135,4.281 4.385,4.51 0.25,0.229 10 false *1

Text in Illustration
*1 High Density Polyethylene (HDPE) *2 Regrind Material
*3 Adhesive *4 Ethylene Vinyl Alcohol Copolymer (EVOH)
*a Fuel Tank Outside *b Fuel Tank Inside


vi.

On the models with dual fuel tank, a fuel pump and jet pump are provided in the main fuel tank to transfer the fuel from sub fuel tank to main fuel tank. This is accomplished by utilizing the fuel flow through the jet pump. The pressure difference is created by the fuel as it passes through the venturi, and it is used to suck the fuel out of the sub fuel tank and send it to the main fuel tank.

W102345E03
1.156,1.615 1.604,1.615 true 2.104,1.708 2.26,1.865 2.26,1.865 2.521,1.865 true 1.927,0.344 2.063,0.208 2.063,0.208 2.198,0.208 true 1.896,1.917 1.896,2.104 true 3.656,1.917 3.656,2.104 true 4.667,0.708 4.323,0.365 4.323,0.365 4.177,0.365 true 0.969,1.542 1.177,1.729 0.208,0.188 10 false *1 2.552,1.792 2.76,1.979 0.208,0.188 10 false *2 4.01,0.292 4.219,0.479 0.208,0.188 10 false *2 4.792,0.229 5,0.417 0.208,0.188 10 false *a 5.823,1.344 6.031,1.531 0.208,0.188 10 false *b 4.813,1.906 5.021,2.094 0.208,0.188 10 false *c 1.813,2.125 2.021,2.313 0.208,0.188 10 false *4 3.563,2.135 3.771,2.323 0.208,0.188 10 false *5 2.229,0.115 2.479,0.354 0.25,0.24 10 false *3

Text in Illustration
*1 Fuel Pump *2 Jet Pump
*3 Fuel Pump Filter Assembly *4 Main Fuel Tank
*5 Sub Fuel Tank - -
*a From Fuel Pump *b From Sub Fuel Tank
*c To Main Fuel Tank - -



f.

Fuel Pump Filter Assembly

i.

On the models with dual fuel tank, a fuel pump filter assembly is provided between the jet pump and fuel pump.

W102346E02
3.74,0.74 3.74,0.292 3.74,0.292 3.927,0.292 true 3.969,0.219 4.313,0.479 0.344,0.26 10 false *1 4.615,1.646 4.906,1.885 0.292,0.24 10 false *b 4.927,0.354 5.135,0.542 0.208,0.188 10 false *a

Text in Illustration
*1 Fuel Pump Filter Assembly - -
*a From Fuel Pump *b To Jet Pump



g.

Fuel Cooler

i.

An air-cooled fuel cooler is used, along with the increased power output of the engine.

W102347E03
5.042,0.99 5.083,0.594 5.083,0.594 5.219,0.594 true 1.365,0.771 1.26,0.427 1.26,0.427 1.146,0.427 true 1.135,1.417 1.281,1.604 0.146,0.188 10 false A 2.854,0.76 3,0.948 0.146,0.188 10 false A 5.385,1.51 5.583,1.698 0.198,0.188 10 false *a 5.26,0.5 5.458,0.688 0.198,0.188 10 false *2 0.979,0.354 1.177,0.542 0.198,0.188 10 false *1

Text in Illustration
*1 Fuel Cooler *2 Fuel
*a A - A Cross Section - -
V100136

To Fuel Tank
V100135

From Engine




OPERATION


a.

Supply Pump Assembly

i.

Due to the rotation of the eccentric cam, the ring cam pushes plunger "A" upward as illustrated below. The force of the spring pulls plunger "B" (which is located opposite plunger "A") upward. As a result, plunger "B" draws fuel in, and plunger "A" pumps fuel at the same time.

W102348E02
1.604,0.427 1.604,0.177 1.604,0.177 1.469,0.177 true 0.51,1.656 0.51,1.406 0.51,1.406 0.375,1.406 true 2.5,0.427 2.5,0.177 2.5,0.177 2.635,0.177 true 1.979,1.427 1.083,0.531 1.083,0.531 0.896,0.531 true 2.354,1.271 2.458,1.167 2.458,1.167 2.531,1.167 true 2.104,0.927 2.448,0.792 2.448,0.792 2.542,0.792 true 2.198,1.979 2.51,2.115 2.51,2.115 2.583,2.115 true 1.292,0.104 1.5,0.292 0.208,0.188 10 false *1 0.698,0.458 0.906,0.646 0.208,0.188 10 false *3 2.563,0.719 2.75,0.906 0.188,0.188 10 false *4 2.573,1.083 2.76,1.271 0.188,0.188 10 false *5 0.469,2.333 0.656,2.521 0.188,0.188 10 false *8 0.208,1.333 0.396,1.521 0.188,0.188 10 false *7 2.594,2.042 2.781,2.229 0.188,0.188 10 false *6 2.667,0.083 2.875,0.271 0.208,0.188 10 false *2

Text in Illustration
*1 Check Valve (for Suction) *2 Check Valve (for Discharge)
*3 Eccentric Cam *4 Plunger "A"
*5 Ring Cam *6 Plunger "B"
*7 Section Control Valve (SCV) *8 ECM


ii.

The ECM controls the opening of the SCV in order to regulate the volume of fuel that is pumped by the supply pump to the common-rail. Consequently, the fuel pressure in the common-rail is controlled to the target injection pressure.


iii.

When the opening of the SCV is small, the fuel suction area is kept small, which decreases the transferable fuel quantity.


iv.

When the plunger strokes fully, however, the suction volume becomes small due to the small suction area.


v.

Pumping will start when the fuel pressure has become higher than the common-rail pressure.

W102349E06
1.604,0.521 1.5,0.292 1.5,0.292 1.438,0.292 true 3.771,0.51 3.865,0.281 3.865,0.281 3.927,0.281 true 5.135,0.51 5.24,0.135 5.24,0.135 5.302,0.135 true 3.146,0.667 3.146,0.146 3.146,0.146 3.052,0.146 true 0.844,1.958 0.969,1.74 0.969,1.74 1.031,1.74 true 0.823,2.208 0.823,2.531 true 0.052,0.917 0.823,1.24 0.771,0.323 10 false Cam Stroke 1.531,3.26 1.75,3.583 0.219,0.323 10 false (3) 3.375,3.271 3.594,3.594 0.219,0.323 10 false (4) 5.083,3.271 5.302,3.594 0.219,0.323 10 false (5) 0.448,2.542 1.344,3.146 0.896,0.604 10 false Small Suction Area 0.625,0.198 1.479,0.521 0.854,0.323 10 false Plunger TDC 3.979,0.188 4.813,0.427 0.833,0.24 10 false Plunger BDC 1.792,0.052 3.083,0.375 1.292,0.323 10 false Fuel Pumping Mass 5.354,0.042 6.833,0.208 1.479,0.167 10 false Pumping Starting Point 1.073,1.656 1.417,1.979 0.344,0.323 10 false SCV


vi.

When the opening of the SCV is large, the fuel suction area is kept large, which increases the transferable fuel quantity.


vii.

If the plunger strokes fully, the suction volume will increase because the suction area is large.


viii.

Pumping will start at the time when the fuel pressure has become higher than the common-rail pressure.

W102350E08
4.135,0.521 4.24,0.146 4.24,0.146 4.302,0.146 true 3.365,0.688 3.365,0.135 3.365,0.135 3.271,0.135 true 1.052,1.896 1.177,1.677 1.177,1.677 1.24,1.677 true 1.042,2.135 1.042,2.469 true 0.313,0.865 1.083,1.188 0.771,0.323 10 false Cam Stroke 1.75,3.208 1.969,3.531 0.219,0.323 10 false (6) 3.76,3.188 3.979,3.51 0.219,0.323 10 false (7) 5.698,3.156 5.917,3.479 0.219,0.323 10 false (8) 1.281,1.594 1.625,1.917 0.344,0.323 10 false SCV 0.688,2.469 1.552,3.083 0.865,0.615 10 false Large Suction Area 1.99,0.052 3.281,0.375 1.292,0.323 10 false Fuel Pumping Mass 4.354,0.063 5.896,0.458 1.542,0.396 10 false Pumping Starting Point



b.

Injector Assembly

i.

When electrical current is applied to the solenoid coil, it pulls the solenoid valve up.


ii.

The orifice of the control chamber opens, allowing the fuel to flow out.


iii.

The fuel pressure in the control chamber drops.


iv.

Simultaneously, fuel flows from the orifice to the bottom of the piston and raises the piston up (to enhance response).


v.

As a result, the piston raises the nozzle needle to inject fuel.

U170781E03
2.01,0.469 1.375,0.469 true 2.021,0.667 1.385,0.667 true 2.125,1.417 1.385,1.417 true 2.125,1.99 1.385,1.99 true 1.771,0.229 1.635,0.104 1.635,0.104 1.469,0.104 true 5.229,0.885 6.083,1.063 6.083,1.063 6.219,1.063 true 5.073,1.167 5.927,1.344 5.927,1.344 6.063,1.344 true 5.365,1.75 6.219,1.927 6.219,1.927 6.354,1.927 true 4.875,2.26 4.563,2.438 4.563,2.438 4.427,2.438 true 1.271,0.01 1.469,0.188 0.198,0.177 10 false *1 4.177,0.26 4.385,0.469 0.208,0.208 10 false (1) 6.281,0.969 6.49,1.177 0.208,0.208 10 false (2) 6.115,1.25 6.385,1.521 0.271,0.271 10 false (3) 6.375,1.802 6.625,2.063 0.25,0.26 10 false (4) 4.24,2.333 4.448,2.542 0.208,0.208 10 false (5) 1.188,1.052 1.385,1.229 0.198,0.177 10 false *a 3.146,1.063 3.344,1.24 0.198,0.177 10 false *b 1.208,0.375 1.406,0.552 0.198,0.177 10 false *2 1.208,0.573 1.406,0.75 0.198,0.177 10 false *3 1.208,1.323 1.406,1.5 0.198,0.177 10 false *4 1.208,1.896 1.406,2.073 0.198,0.177 10 false *5

Text in Illustration
*1 Injector Assembly *2 Solenoid Coil
*3 Solenoid Valve *4 Piston
*5 Nozzle Needle - -
*a Fuel from Common-rail *b Return Fuel



c.

Fuel Filter Assembly

i.

Except on the cold area specification models, a fuel filter warning switch is used.


ii.

On the models for South Africa, a fuel heater is used.

W128651E03
4.688,2.667 4.688,2.927 4.688,2.927 5.125,2.927 false 0.688,0.323 1.333,0.656 0.646,0.333 10 false Fuel Tank 3.229,1.719 4.594,2.438 1.365,0.719 10 false Fuel Sedimenter Level Warning Switch 0.573,2.094 1.458,2.427 0.885,0.333 10 false Filter Element 5.5,1.594 6.75,1.927 1.25,0.333 10 false Combination Meter 2.781,1.094 4.646,1.427 1.865,0.333 10 false Fuel Filter Warning Switch*2 0.594,1.094 1.469,1.427 0.875,0.333 10 false Fuel Heater*1 0.333,3.01 4.917,3.344 4.583,0.333 10 false *1: Models for South Africa 0.333,3.375 4.917,3.708 4.583,0.333 10 false *2: Except cold area specification models 5.177,2.833 5.865,3.167 0.688,0.333 10 false Fuel Filter 2.469,0.323 3.333,0.719 0.865,0.396 10 false Supply Pump 4.073,0.313 4.938,0.708 0.865,0.396 10 false Common-rail 5.698,0.313 6.219,0.729 0.521,0.417 10 false Injector


iii.

A fuel filter warning switch, which turns on or off when the internal vacuum of the filter increases, is provided in the fuel filter. This switch, which turns off when the internal vacuum of the fuel filter increases to a predetermined level, is connected by wire to the meter ECU.


iv.

When the meter ECU detects that the internal vacuum of the fuel filter has increased (by way of the fuel filter warning switch off signal), it determines that the fuel filter has become clogged. Then, it illuminates the fuel system warning light on the combination meter to urge the driver to replace the fuel filter.

W102352E13
0.938,0.896 1.198,0.896 true 2.313,2.427 2.552,2.427 true 1.354,0.906 1.354,0.271 1.354,0.271 1.51,0.271 true 2.958,1.573 3.083,0.708 3.083,0.708 3.135,0.708 true 2.729,1.792 2.667,1.729 2.667,1.729 1.635,1.729 true 1.427,2.542 1.292,2.594 true 6.042,2.177 6.042,2.448 true 1.948,0.948 2.677,1.271 0.729,0.323 10 false Meter ECU 0.104,0.813 0.906,1.531 0.802,0.719 10 false Combination Meter 0.917,1.635 1.646,1.979 0.729,0.344 10 false Diaphragm 0.177,2.052 0.844,2.688 0.667,0.635 10 false From Fuel Tank 3.354,2.229 3.802,3.219 0.448,0.99 10 false To Supply Pump 2.604,2.354 3.167,2.969 0.563,0.615 10 false Filter Element 0.938,2.51 1.26,3.115 0.323,0.604 10 false Fuel Filter 1.26,3.177 2.823,3.479 1.563,0.302 10 false - Normal Fuel Filter - 4.271,3.188 5.958,3.542 1.688,0.354 10 false - Fuel Filter Clogged Up - 1.552,0.188 3.313,0.563 1.76,0.375 10 false Fuel System Warning Light 3.188,0.635 4.24,1.427 1.052,0.792 10 false Fuel Filter Warning Switch 5.073,0.938 5.802,1.26 0.729,0.323 10 false Meter ECU 5.625,2.469 6.771,3.125 1.146,0.656 10 false Negative Pressure (Vacuum)


v.

The fuel heater electrically heats the fuel.


vi.

When the water in the sedimenter section reaches a certain amount, the fuel sedimenter level warning switch comes on, the warning light in the combination meter illuminates, and the multi buzzer sounds.