Home › Engine / Hybrid System › 1GR-FE INTAKE / EXHAUST › INTAKE SYSTEM
NM27T0E _51 Engine / Hybrid System _053591 1GR-FE INTAKE / EXHAUST _0260117 INTAKE SYSTEM UN GENERAL/CONTROL/DETAILS F

1GR-FE INTAKE / EXHAUST  INTAKE SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


CONSTRUCTION


a.

Air Cleaner Assembly

i.

The air cleaner filter element uses a filter paper that ensures a high level of filtering performance while reducing pressure loss.


ii.

Except models for Europe, a cyclone pre-cleaner has been provided in the air cleaner inlet. This cyclone pre-cleaner has a screw shape and gathers large-sized dusts particles in a dust cup by swirling the inlet air.

W100643E04
1.635,1.479 1.427,1.167 1.427,1.167 1.302,1.167 true 1.156,2.281 0.927,1.823 0.927,1.823 0.75,1.823 true 1.229,3.073 0.906,2.781 0.906,2.781 0.75,2.781 true 4.281,2.469 4.115,2.052 4.115,2.052 3.938,2.052 true 5.094,2.865 4.906,3.26 4.906,3.26 4.802,3.26 true 4.792,2.323 4.854,1.802 4.854,1.802 4.979,1.802 true 1.917,0.594 1.479,0.594 true 1.313,0.469 1.5,0.688 0.188,0.219 10 false *1 1.125,1.052 1.313,1.271 0.188,0.219 10 false *2 0.573,1.708 0.75,1.927 0.177,0.219 10 false *3 0.583,2.667 0.76,2.927 0.177,0.26 10 false *4 3.771,1.927 3.958,2.146 0.188,0.219 10 false *5 4.635,3.135 4.823,3.375 0.188,0.24 10 false *6 5.01,1.677 5.208,1.906 0.198,0.229 10 false *a

Text in Illustration
*1 Air Cleaner Cap *2 Air Cleaner Element
*3 Air Cleaner Case *4 Cyclone Pre-cleaner
*5 Turbinated Blade *6 Dust Cup
*a Swirl Air Flow - -



b.

Throttle Body

i.

A linkless-type throttle body, in which the throttle position sensor and the throttle control motor are integrated, is used. It achieves excellent throttle valve control.


ii.

For the throttle control motor, a DC motor with excellent response and minimal power consumption is used. The ECM performs duty cycle control of the direction and the amperage of the current supplied to the throttle control motor in order to regulate the throttle valve angle.

W102381E04
3.188,0.781 2.927,0.302 2.927,0.302 2.802,0.302 true 4.604,1.063 4.781,0.719 4.781,0.719 4.896,0.719 true 3.958,2.177 3.854,2.417 3.854,2.417 3.698,2.417 true 3.531,2.302 3.719,2.521 0.188,0.219 10 false *3 2.635,0.188 2.823,0.406 0.188,0.219 10 false *1 4.927,0.604 5.146,0.854 0.219,0.25 10 false *2

Text in Illustration
*1 Throttle Valve *2 Throttle Position Sensor
*3 Throttle Control Motor - -



c.

Intake Manifold

i.

A light weight aluminum alloy is used for the intake manifold.


ii.

The intake manifold gaskets have a rubber coating applied to their surfaces. They provide superior durability.

W100658E02
5.188,1.302 6.396,2.448 1.208,1.146 2.646,0.896 2.354,0.531 2.354,0.531 2.156,0.531 true 3.208,2.396 3.427,2.073 3.427,2.073 4.042,2.073 true 3.865,2.073 3.458,2.698 true 5.552,1.833 5.552,1.573 5.552,1.573 5.698,1.573 true 1.979,0.406 2.156,0.615 0.177,0.208 10 false *1 1.188,2.385 1.354,2.573 0.167,0.188 10 false A 1.552,2.688 1.698,2.885 0.146,0.198 10 false A 4.073,1.958 4.302,2.198 0.229,0.24 10 false *2 5.729,1.469 5.927,1.688 0.198,0.219 10 false *3 5.698,2.219 5.938,2.406 0.24,0.188 10 false *a

Text in Illustration
*1 Intake Manifold *2 Intake Manifold Gasket
*3 Rubber Coating - -
*a A - A Cross Section - -