Home › Drivetrain › AXLE AND DIFFERENTIAL › DIFFERENTIAL SYSTEM › 2015.06–2017.08
NM27T0E _52 Drivetrain _053619 AXLE AND DIFFERENTIAL _0260152 DIFFERENTIAL SYSTEM UN GENERAL/CONTROL/DETAILS F

AXLE AND DIFFERENTIAL  DIFFERENTIAL SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The front differential uses the SD20B type.


b.

The rear differential uses the BD21B type.


c.

On the models with 1GR-FE, 1GD-FTV or 1KD-FTV engine, the rear differential lock system is optionally provided.


d.

In the unlikely event that one of the rear wheels loses grip on a surface on which it is difficult to transmit drive torque (such as sand), the rear differential lock can connect the left and right rear wheels, thus ensuring the drive torque of the other wheel and assisting in freeing the vehicle in emergency situations.


e.

The 4WD control ECU actuates and controls the shift motor in the differential lock shift actuator. This causes the rear differential lock system to switch the rear differential between free and lock.


f.

The rear differential lock switch is used to switch the rear differential between free and lock.


g.

A low viscosity oil is used, also improving fuel consumption.



SPECIFICATION


a.

Front Differential

i.

Models with 2TR-FE Engine

Transmission Type R150F AC60F
Differential Gear Ratio 4.555 4.777
Ring Gear Size 205 ←
Drive Pinion No. of Gear Teeth 9 ←
Ring Gear No. of Gear Teeth 41 43
No. of Differential Pinion 2 ←
Oil Capacity 1.4 Liters (1.5 US qts, 1.2 Imp.qts) ←
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 33.5 kg (73.9 lb) ←


ii.

Models with 1GR-FE Engine

Transmission Type RA61F AC60F
Differential Gear Ratio 3.909 ←
Ring Gear Size 205 ←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 43 ←
No. of Differential Pinion 2 ←
Oil Capacity 1.4 Liters (1.5 US qts, 1.2 Imp.qts) ←
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 33.7 kg (74.3 lb) ←


iii.

Models with 1GD-FTV Engine

Transmission Type RA61F AC60F
Differential Gear Ratio 3.727 3.909
Ring Gear Size 205 ←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 41 43
No. of Differential Pinion 2 ←
Oil Capacity 1.4 Liters (1.5 US qts, 1.2 Imp.qts) ←
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 39.6 kg (87.3 lb) 33.7 kg (74.3 lb)


iv.

Models with 1KD-FTV Engine

Transmission Type RA61F A750F
Differential Gear Ratio 3.909 ←
Ring Gear Size 205 ←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 43 ←
No. of Differential Pinion 2 ←
Oil Capacity 1.4 Liters (1.5 US qts, 1.2 Imp.qts) ←
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 33.7 kg (74.3 lb) ←


v.

Models with 5L-E Engine

Transmission Type G52F
Differential Gear Ratio 4.555
Ring Gear Size 205
Drive Pinion No. of Gear Teeth 9
Ring Gear No. of Gear Teeth 41
No. of Differential Pinion 2
Oil Capacity 1.4 Liters (1.5 US qts, 1.2 Imp.qts)
Oil Viscosity SAE 75W-85
Oil Grade API GL-5
Weight (Reference) 33.5 kg (73.9 lb)



b.

Rear Differential

i.

Models with 2TR-FE Engine

Transmission Type R150F AC60F
Differential Gear Ratio 4.555 4.777
Ring Gear Size 208 ←
Drive Pinion No. of Gear Teeth 9 ←
Ring Gear No. of Gear Teeth 41 43
No. of Differential Pinion 4 ←
Oil Capacity 2.7 Liters (2.9 US qts, 2.4 Imp. qts) 2.7 Liters (2.9 US qts, 2.4 Imp. qts)*1
2.2 Liters (2.3 US qts, 1.9 Imp. qts)*2
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 29.2 kg (64.4 lb) 29.4 kg (64.8 lb)

HINT:

*1: 5-door models

*2: 3-door models



ii.

Models with 1GR-FE Engine

Transmission Type RA61F AC60F
Differential Gear Ratio 3.909 ←
Ring Gear Size 208 ←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 43 ←
No. of Differential Pinion 4 ←
Oil Capacity 2.7 Liters (2.9 US qts, 2.4 Imp. qts) 2.7 Liters (2.9 US qts, 2.4 Imp. qts)*1
2.65 Liters (2.8 US qts, 2.3 Imp. qts)*2
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 28.9 kg (63.7 lb) 28.9 kg (63.7 lb)*1
31.4 kg (69.2 lb)*2

HINT:

*1: Models without rear differential lock system

*2: Models with rear differential lock system



iii.

Models with 1GD-FTV Engine

Transmission Type RA61F AC60F
Differential Gear Ratio 3.727 3.909
Ring Gear Size 208 ←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 41 43
No. of Differential Pinion 4 ←
Oil Capacity 2.7 Liters (2.9 US qts, 2.4 Imp. qts)*1
2.2 Liters (2.3 US qts, 1.9 Imp. qts)*2
2.7 Liters (2.9 US qts, 2.4 Imp.qts)*3v
2.65 Liters (2.8 US qts, 2.3 Imp.qts)*4
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 28.8 kg (63.5 lb) 28.9 kg (63.7 lb)*3
31.4 kg (69.2 lb)*4

HINT:

*1: 5-door models

*2: 3-door models

*3: Models without rear differential lock system

*4: Models with rear differential lock system



iv.

Models with 1KD-FTV Engine

Transmission Type RA61F A750F
Differential Gear Ratio 3.909 ←
Ring Gear Size 208 ←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 43 ←
No. of Differential Pinion 4 ←
Oil Capacity 2.7 Liters (2.9 US qts, 2.4 Imp. qts)*1
2.2 Liters (2.3 US qts, 1.9 Imp. qts)*2
2.7 Liters (2.9 US qts, 2.4 Imp. qts)*3
2.65 Liters (2.8 US qts, 2.3 Imp. qts)*4
2.2 Liters (2.3 US qts, 1.9 Imp. qts)*2
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 28.9 kg (63.7 lb) 28.9 kg (63.7 lb)*3
31.4 kg (69.2 lb)*4

HINT:

*1: 5-door models

*2: 3-door models

*3: Models without rear differential lock system

*4: Models with rear differential lock system



v.

Models with 5L-E

Transmission Type RA61F
Differential Gear Ratio 4.555
Ring Gear Size 208
Drive Pinion No. of Gear Teeth 9
Ring Gear No. of Gear Teeth 41
No. of Differential Pinion 4
Oil Capacity 2.7 Liters (2.9 US qts, 2.4 Imp. qts)*
Oil Viscosity SAE 75W-85
Oil Grade API GL-5
Weight (Reference) 29.2 kg (64.4 lb)