Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM › 2015.06–2017.08
NM27T0E _56 Audio / Visual / Telematics _053634 PARK ASSIST / MONITORING _0260177 BLIND SPOT MONITOR SYSTEM UN GENERAL/CONTROL/DETAILS F

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


FUNCTION OF MAIN COMPONENTS


a.

The blind spot monitor system has the following functions:

Component Function
Blind Spot Monitor Sensor LH and RH
·

Output millimeter waves from the blind spot monitor sensor to the blind spot sensor detection area, use the reflected millimeter waves for detecting the presence of a vehicle, the vehicle-to-vehicle distance and the relative speed, and then transmit this information to the built-in signal processing circuit.

·

The signal processing circuit determines if a vehicle is present, and illuminates or blinks the outer rear view mirror indicator light accordingly.

·

Dim the outer rear view mirror indicator light on the outer rear view mirror assembly.


Outer Rear View Mirror Assembly
·

Outer Rear View Mirror Indicator Light


·

Illuminates when a vehicle is detected in the detection area (blind spot monitor function).

·

Blinks when the turn signal switch is operated while a vehicle is detected in the detection area (blind spot monitor function).

·

Blinks when another vehicle is detected in the alert area while the vehicle is backing up (RCTA function).


Combination Meter Assembly Blind Spot Monitor Indicator Light Illuminates when the blind spot monitor system is turned on and goes out when the system is turned off in order to inform the driver of the system status.
Multi-information Display Displays the setting screen to turn the blind spot monitor system on or off.
Headlight Dimmer Switch Assembly
·

Turn Signal Switch


Transmits the turn signal switch signal to the blind spot monitor sensor LH and RH.
Steering Angle Sensor Transmits the steering angle signal to the blind spot monitor sensor LH and RH.
Skid Control ECU Transmits the vehicle speed signal to the blind spot monitor sensor LH and RH.
Speed Sensor Transmits the vehicle speed signal to the skid control ECU.
Main Body ECU (Driver Side Junction Block Assembly)
·

Transmits the destination signal to the blind spot monitor sensor LH and RH.

·

Transmits the illumination signal to the blind spot monitor sensor LH and RH.

·

Sends a blind spot monitor system on or off signal to the blind spot monitor sensor LH and RH.


ECM*1 Transmits the reverse signal to the blind spot monitor sensors LH and RH.
Multi-information Switch The blind spot monitor system can be turned on or off by operating this switch.
Driving Support Switch Control ECU Receives a signal from the multi-information switch, and sends a blind spot monitor system on signal or off signal to the main body ECU.
RCTA Buzzer (Blind Spot Monitor Buzzer)*2 Sounds when a vehicle is detected in the alert area while backing up.
Back-up Light Switch Assembly*3 Transmits the reverse signal to the blind spot monitor sensor RH.

*1: Models with automatic transmission

*2: Models with RCTA function

*3: Models with manual transmission




OPERATING CONDITION


a.

Blind Spot Monitor Function

i.

The blind spot monitor function operates when both of the following conditions are met:

·

The blind spot monitor system is on.

·

The vehicle speed is greater than approximately 16 km/h (10 mph).



ii.

The blind spot monitor function can detect vehicles in its detection areas.

·

The detection areas formed by the blind spot monitor sensor LH and RH are as shown below:

Y139591E03
2.677,0.302 2.948,0.583 0.271,0.281 10 false *a 1.698,1.104 1.969,1.385 0.271,0.281 10 false *a 1.677,3.552 1.948,3.833 0.271,0.281 10 false *a 2.698,4.302 2.969,4.583 0.271,0.281 10 false *a 3.75,0.281 4.021,0.563 0.271,0.281 10 false *b 5.698,1.917 5.969,2.198 0.271,0.281 10 false *c 5.688,2.75 5.958,3.031 0.271,0.281 10 false *c 3.74,4.271 4.01,4.552 0.271,0.281 10 false *b

Text in Illustration
*a 3.0 m (9.8 ft.) *b 1.0 m (3.3 ft.)
*c 0.5 m (1.6 ft.) - -
V100144

Blind Spot Detection Area - -



iii.

The following are examples of the operation of the function:

·

The driver's vehicle is overtaken by another vehicle in the adjacent lane.

Y139592E02
4.854,1.99 4.854,2.385 true 4.781,2.406 5.052,2.688 0.271,0.281 10 false *a

Text in Illustration
*a This Vehicle - -
V100135

Vehicle Speed (Fast)
V100136

Vehicle Speed (Slow)
V100144

Blind Spot Detection Area - -

·

When another vehicle enters the detection area of the driver's vehicle due to a lane change.

Y139593E02
4.813,3.208 4.813,3.792 true 4.813,6.583 4.813,7.177 true 4.74,3.813 5.01,4.094 0.271,0.281 10 false *b 3.406,3.833 3.677,4.115 0.271,0.281 10 false *a 3.406,7.167 3.677,7.448 0.271,0.281 10 false *c 4.74,7.198 5.01,7.479 0.271,0.281 10 false *b

Text in Illustration
*a Other Vehicle Enters the Detection Area during Lane Change (Merge in) (Type 1). *b This Vehicle
*c Other Vehicle Enters the Detection Area during Lane Change (Merge in) (Type 2). - -
V100135

Motion Direction of Other Vehicle
V100136

Motion Direction of Driver's Vehicle
V100144

Detection Area - -




b.

The RCTA function can detect vehicles in its detection areas.

i.

The system continuously measures the relative speed of an approaching vehicle and its distance. If it is determined that the approaching vehicle will cross in the path of this vehicle, the Estimated Crossing Time (ECT) is calculated. When the ECT is 2.5 seconds or less, the system alerts the driver by flashing the outer rear view mirror indicator lights and sounding the RCTA buzzer.

Y139594E02
4.427,0.344 4.427,1.01 true 2.792,1.51 2.792,2.5 true 0.688,2.656 0.688,3.156 true 4.354,0.083 4.625,0.365 0.271,0.281 10 false *a 2.708,1.292 2.979,1.573 0.271,0.281 10 false *b 0.615,3.188 0.885,3.469 0.271,0.281 10 false *c 3.76,3.188 4.031,3.469 0.271,0.281 10 false *d 2.583,3.615 2.854,3.896 0.271,0.281 10 false *e 3.135,3.219 3.406,3.5 0.271,0.281 10 false *f

Text in Illustration
*a This Vehicle *b Target Vehicle (Approximately 8 km/h (5 mph))
*c Target Vehicle (Approximately 28 km/h (18 mph)) *d Approximately 5.5 m (18.0 ft.)
*e Approximately 20 m (66 ft.) *f Target Detection Line
V100144

Alert Area - -


ii.

Normal Parking

Y139595E02
3.583,0.208 3.583,0.771 true 2.354,2.177 2.354,2.479 true 5.188,1.802 5.188,2.104 true 3.5,0.01 3.771,0.292 0.271,0.281 10 false *a 2.281,2.521 2.552,2.708 0.271,0.188 10 false *b 5.115,2.167 5.385,2.354 0.271,0.188 10 false *b

Text in Illustration
*a This Vehicle *b Target Vehicle
V100144

Alert Area - -


iii.

Angle Parking

Y139596E03
3.771,0.25 3.771,0.74 true 2.188,2.156 2.188,2.448 true 5.198,1.74 5.198,2.031 true 3.688,0.042 3.958,0.323 0.271,0.281 10 false *a 2.125,2.479 2.396,2.76 0.271,0.281 10 false *b 5.125,2.042 5.396,2.323 0.271,0.281 10 false *b 3.052,2.115 3.323,2.396 0.271,0.281 10 false *c

Text in Illustration
*a This Vehicle *b Target Vehicle
*c Approximately 55 to 140 degree - -
V100144

Alert Area - -




CONSTRUCTION


a.

Blind Spot Monitor Sensor

i.

The blind spot monitor sensor consists of a millimeter wave radar circuit and a signal processing circuit.


ii.

The millimeter wave radar uses frequencies in the 24 GHz band.

Y139597E04
4.885,2.135 5.615,2.865 true 2.958,2.615 3.688,3.344 true 5.646,2.865 5.917,3.146 0.271,0.281 10 false *2 3.729,3.323 4,3.604 0.271,0.281 10 false *1 0.917,3.427 1.188,3.708 0.271,0.281 10 false *a 1.542,2.625 1.813,2.906 0.271,0.281 10 false *b 1.281,2.813 1.552,3.094 0.271,0.281 10 false *c

Text in Illustration
*1 Blind Spot Monitor Sensor LH *2 Blind Spot Monitor Sensor RH
*a Distance: Approximately 50 m (164 ft.) *b Horizontal Angle: Approximately 150°
*c Vertical Angle: Approximately 20° - -


iii.

The distance to the object, azimuth and relative speed are calculated from the information that is provided by the reflected millimeter wave radar as described below:

Item Calculation Method
Distance Calculated from the length of time that has elapsed from the time the waves of the millimeter wave radar have been emitted, until the reflected waves are received by the millimeter wave radar circuit. The distance is approximately 50 m (164 ft.).
Azimuth Calculated from the reception angle of the millimeter wave radar reflections received. The detection angle has a horizontal range of approximately 150° and a vertical range of approximately 20°.
Relative Speed Calculated by utilizing the change (Doppler effect*) that occurs in the frequency of the reflected millimeter wave radar waves.

HINT:

*: The Doppler effect causes the observer to perceive the radio waves emitted by a moving object to be a higher frequency as it approaches, and to be a lower frequency as it recedes. This phenomenon is created because when an object is located far away, the radio waves are perceived at higher frequencies than those of the radio source. An SST is used if radar axis confirmation is needed. For details, refer to the Repair Manual.





OPERATION


a.

Blind Spot Monitor Function

i.

According to operation conditions, the blind spot monitor function promotes safety confirmation by using the outer rear view mirror indicator light to inform the driver that another vehicle has entered the blind spot monitor sensor detection area of this vehicle.


ii.

The outer rear view mirror indicator light informs the driver that a vehicle is present in the blind spot detection area by illuminating when the turn signal switch is not operated and by flashing when a vehicle is present and the turn signal switch is operated.

Y182731E03
2.24,4.375 2.323,4.167 true 0.406,0.135 1.99,0.667 1.583,0.531 10 false OUTER REAR VIEW MIRROR ASSEMBLY LH 5.052,0.135 6.667,0.656 1.615,0.521 10 false OUTER REAR VIEW MIRROR ASSEMBLY RH 5.26,0.781 6.583,1.823 1.323,1.042 10 false OUTER REAR VIEW MIRROR INDICATOR LIGHT 0.542,0.792 1.875,1.802 1.333,1.01 10 false OUTER REAR VIEW MIRROR INDICATOR LIGHT 0.438,2.333 1.938,3 1.5,0.667 10 false BLIND SPOT MONITOR SENSOR LH 0.344,3.865 1.896,4.438 1.552,0.573 10 false POWER MANAGEMENT CONTROL ECU 5.146,2.333 6.688,2.865 1.542,0.531 10 false BLIND SPOT MONITOR SENSOR RH 0.125,4.76 1.344,5.5 1.219,0.74 10 false STEERING ANGLE SENSOR 2.281,5.198 3.583,5.479 1.302,0.281 10 false SPEED SENSOR 4.094,3.958 4.771,4.24 0.677,0.281 10 false ECM 2.125,6.01 3.552,6.396 1.427,0.385 10 false SKID CONTROL ECU 4.802,4.677 6.854,5.292 2.052,0.615 10 false MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK ASSEMBLY) 4.333,7.417 6.604,7.792 2.271,0.375 10 false COMBINATION METER ASSEMBLY 4.406,5.885 6.25,6.51 1.844,0.625 10 false DRIVING SUPPORT SWITCH CONTROL ECU 4.375,6.865 6.479,7.25 2.104,0.385 10 false MULTI-INFORMATION SWITCH 2.74,2.802 4.313,3.177 1.573,0.375 10 false - TURN SIGNAL SWITCH 4.719,7.896 5.177,8.281 0.458,0.385 10 false DLC3 2.76,2.135 4.156,2.729 1.396,0.594 10 false HEADLIGHT DIMMER SWITCH ASSEMBLY 5.729,5.438 6.698,5.948 0.969,0.51 10 false CAN (MS Bus) 3.927,5.448 4.885,5.781 0.958,0.333 10 false CAN (V1 Bus) 0.125,3.104 1,3.333 0.875,0.229 10 false CAN (V2 Bus) 1.969,4.385 4.198,4.719 2.229,0.333 10 false CAN (Power Management Bus)*1 2.979,3.438 4.302,3.771 1.323,0.333 10 false CAN (Sensor Bus) 0.115,7.208 3.542,8.219 3.427,1.01 10 false *1: Except models with 2TR-FE engine, 1GR-FE engine (with automatic transmission) and 1GD-FTV engine



b.

RCTA Function

i.

According to operation conditions, the RCTA function promotes safety confirmation by using the outer rear view mirror indicator lights and RCTA buzzer to inform the driver that another vehicle has entered the blind spot monitor sensor alert area of this vehicle.


ii.

When this vehicle is reversing, if a vehicle enters the alert area of the blind spot monitor sensors and it is determined the vehicle will cross in the path of this vehicle, the system alerts the driver by flashing the outer rear view mirror indicator lights and sounding the RCTA buzzer.

Y182732E03
2.313,4.365 2.396,4.156 true 0.365,0.135 1.979,0.719 1.615,0.583 10 false OUTER REAR VIEW MIRROR ASSEMBLY LH 5.083,0.135 6.719,0.656 1.635,0.521 10 false OUTER REAR VIEW MIRROR ASSEMBLY RH 5.229,0.76 6.552,1.813 1.323,1.052 10 false OUTER REAR VIEW MIRROR INDICATOR LIGHT 0.542,0.771 1.865,1.854 1.323,1.083 10 false OUTER REAR VIEW MIRROR INDICATOR LIGHT 0.458,2.333 1.958,3 1.5,0.667 10 false BLIND SPOT MONITOR SENSOR LH 0.344,3.844 1.896,4.49 1.552,0.646 10 false POWER MANAGEMENT CONTROL ECU 5.146,2.344 6.667,2.979 1.521,0.635 10 false BLIND SPOT MONITOR SENSOR RH 5.313,3.615 6.771,4.271 1.458,0.656 10 false BACK-UP LIGHT SWITCH ASSEMBLY*1 0.135,4.75 1.365,5.458 1.229,0.708 10 false STEERING ANGLE SENSOR 0.052,7.198 2.896,7.479 2.844,0.281 10 false *1: Models with manual transmission 2.26,5.177 3.563,5.458 1.302,0.281 10 false SPEED SENSOR 4.083,3.948 4.76,4.229 0.677,0.281 10 false ECM 2.104,6.021 3.625,6.406 1.521,0.385 10 false SKID CONTROL ECU 4.76,4.688 6.802,5.281 2.042,0.594 10 false MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK ASSEMBLY) 4.354,7.417 6.719,7.802 2.365,0.385 10 false COMBINATION METER ASSEMBLY 4.406,5.885 6.281,6.542 1.875,0.656 10 false DRIVING SUPPORT SWITCH CONTROL ECU 4.427,6.865 6.531,7.25 2.104,0.385 10 false MULTI-INFORMATION SWITCH 4.667,7.875 5.125,8.26 0.458,0.385 10 false DLC3 2.542,2.188 4.396,3.104 1.854,0.917 10 false RCTA BUZZER (BLIND SPOT MONITOR BUZZER) 5.74,5.417 6.708,5.927 0.969,0.51 10 false CAN (MS Bus) 3.917,5.427 4.875,5.76 0.958,0.333 10 false CAN (V1 Bus) 0.125,3.094 1.042,3.333 0.917,0.24 10 false CAN (V2 Bus) 2.021,4.385 4.188,4.719 2.167,0.333 10 false CAN (Power Management Bus)*2 2.969,3.469 4.292,3.802 1.323,0.333 10 false CAN (Sensor Bus) 0.052,7.615 3.469,8.625 3.417,1.01 10 false *2: Except models with 2TR-FE engine, 1GR-FE engine (with automatic transmission) and 1GD-FTV engine




DIAGNOSIS


a.

The blind spot monitor system is equipped with a diagnosis function that can display warning messages on the multi-information display. For details, refer to the Repair Manual.