OUTLINE
The entry and start system has the following main functions, making it a very user-friendly system:
| Function | Outline | |
|---|---|---|
| Start Function | The start function is operated by simply pressing the engine switch while carrying the key. When the engine switch is pressed, the power management control ECU turns on/off the ACC relay, IG1 relay, and IG2 relay to switch the power source pattern.
·
The power source mode changes depending on depression of the brake pedal*1 or clutch pedal*2 and the shift lever position*1. |
|
| Start Function | Engine Immobiliser | The engine immobiliser function compares the ID code registered in the ID code box with the ID code of the transponder chip embedded in the key. |
| Steering Lock | The steering lock function is operated to lock and unlock the steering wheel by using the lock/unlock motor in steering column assembly. | |
| Entry Function | Entry Unlock:
·
All doors are unlocked by grabbing the driver or front passenger outside door handle or by pressing the unlock switch of the back door. Entry Lock: ·
All doors are locked by touching the lock sensor of the driver or front passenger outside door handle or pressing the lock switch of the back door. |
|
| Entry Function | Glass Hatch Opener*3 | The glass hatch is opened by pressing the glass hatch opener switch. |
| Wireless Door Lock Control | The wireless door lock control function is a convenient feature to lock or unlock all doors, or to open the glass hatch*3 at a distance. The basic operation is the same as that of the wireless door lock control system. | |
*1: Models with automatic transmission
*2: Models with manual transmission
*3: Models with glass hatch opener system