Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF SYSTEM
NM27T0E _59 Vehicle Exterior _053646 SLIDING ROOF / CONVERTIBLE _0260199 SLIDING ROOF SYSTEM UN GENERAL/CONTROL/DETAILS F

SLIDING ROOF / CONVERTIBLE  SLIDING ROOF SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The sliding roof system uses a single glass panel to perform the tilt up-and-down and slide open-and-close operations.


b.

The sliding roof ECU controls the sliding roof system. This ECU uses 2 Hall ICs to detect the position of the sliding roof. The sliding roof ECU and the 2 Hall ICs are integrated in the sliding roof drive gear sub-assembly.



PRECAUTION


a.

The sliding roof ECU memorizes the initial position of the sliding roof. This memory is not cleared if the battery terminals are disconnected. However, initialization is necessary after the sliding roof drive gear sub-assembly is replaced.