Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM › from 2017.08
NM27T0E _57 Power Source / Network _053635 NETWORKING _0260180 CAN COMMUNICATION SYSTEM UN GENERAL/CONTROL/DETAILS F

NETWORKING  CAN COMMUNICATION SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The Controller Area Network (CAN) is a serial data communication network for real time application. It is a multiplex communication network to be equipped in a vehicle, and has communication speeds of 500 kbps (HS-CAN) and 250 kbps (MS-CAN), and the ability to detect malfunctions.


b.

The HS-CAN consists of a V bus, bus 2*, bus 3*, bus 5* and local bus.

*: Except models with 5L-E engine



c.

The MS-CAN consists of a sub bus 1*.

*: Except models with 5L-E engine



d.

The communication wire used is a twisted-pair wire. The bus line has a high line (2.5 V to 3.5 V of voltage is applied) and a low line (1.5 V to 2.5 V of voltage is applied).


e.

The central gateway ECU (network gateway ECU) and main body ECU (driver side junction block assembly) have a gateway function. The ECU connects the respective buses in order to establish communication between each bus.