Home › Drivetrain › AXLE AND DIFFERENTIAL › DIFFERENTIAL SYSTEM › 2017.08–2020.08
NM27T0E _52 Drivetrain _053619 AXLE AND DIFFERENTIAL _0260152 DIFFERENTIAL SYSTEM UN GENERAL/CONTROL/DETAILS F

AXLE AND DIFFERENTIAL  DIFFERENTIAL SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

Front Differential

i.

An SD20B type front differential used.


ii.

A double-row tapered roller bearing is used for the front differential drive pinion bearing to reduce friction loss, thus improving fuel consumption.

X102258



b.

Rear Differential

i.

An BD21B, BD21BN or BD21BT type rear differential is used.


ii.

A rear differential lock system is used for the BD21BN type rear differential. rear differential lock system In the unlikely event that one of the rear wheels loses grip on a surface on which it is difficult to transmit drive torque (such as sand), the rear differential lock can connect the left and right rear wheels, thus ensuring the drive torque of the other wheel and assisting in freeing the vehicle in emergency situations.


iii.

The 4WD control ECU actuates and controls the shift motor in the differential lock shift actuator. This causes the rear differential lock system to switch the rear differential between free and lock.


iv.

An BD21BT type rear differential with TORSEN* Limited Slip Differential (LSD) is used. By optimally distributing drive force in accordance with acceleration operation, a high level of traction performance, operability and driving stability have been achieved.

HINT:

*: TORSEN is a registered trademark of JTEKT Corporation.



v.

A low viscosity oil is used, also improving fuel consumption.

BD21B Rear Differential
X138123

BD21BN Rear Differential
X138122

BD21BT Rear Differential
X138084




SPECIFICATION


a.

Front Differential

i.

Models with 2TR-FE Engine

Transmission Type R150F AC60F
Differential Gear Ratio 4.555 4.777
Ring Gear Size 205 ←
Drive Pinion No. of Gear Teeth 9 ←
Ring Gear No. of Gear Teeth 41 43
No. of Differential Pinion 2 ←
Oil Capacity 1.4 Liters (1.5 US qts, 1.2 Imp. qts) ←
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 33.5 kg (73.9 lb) ←


ii.

Models with 1GR-FE Engine

Transmission Type RA61F AC60F
Differential Gear Ratio 3.909 ←
Ring Gear Size 205 ←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 43 ←
No. of Differential Pinion 2 ←
Oil Capacity 1.4 Liters (1.5 US qts, 1.2 Imp. qts) ←
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 33.7 kg (74.3 lb) ←


iii.

Models with 1GD-FTV Engine

Transmission Type RA61F AC60F
Differential Gear Ratio 3.727 3.909
Ring Gear Size 205 ←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 41 43
No. of Differential Pinion 2 ←
Oil Capacity 1.4 Liters (1.5 US qts, 1.2 Imp. qts) ←
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 39.6 kg (87.3 lb) 33.7 kg (74.3 lb)


iv.

Models with 1KD-FTV Engine

Transmission Type RA61F A750F
Differential Gear Ratio 3.909 ←
Ring Gear Size 205 ←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 43 ←
No. of Differential Pinion 2 ←
Oil Capacity 1.4 Liters (1.5 US qts, 1.2 Imp. qts) ←
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 33.7 kg (74.3 lb) ←


v.

Models with 5L-E Engine

Transmission Type G52F
Differential Gear Ratio 4.555
Ring Gear Size 205
Drive Pinion No. of Gear Teeth 9
Ring Gear No. of Gear Teeth 41
No. of Differential Pinion 2
Oil Capacity 1.4 Liters (1.5 US qts, 1.2 Imp. qts)
Oil Viscosity SAE 75W-85
Oil Grade API GL-5
Weight (Reference) 33.5 kg (73.9 lb)



b.

Rear Differential

i.

Models with 2TR-FE Engine

Transmission Type R150F AC60F
Differential Gear Ratio 4.555 4.777
Ring Gear Size 208 ←
Drive Pinion No. of Gear Teeth 9 ←
Ring Gear No. of Gear Teeth 41 43
No. of Differential Pinion 4 ←
Oil Capacity 2.7 Liters (2.9 US qts, 2.4 Imp. qts) 2.7 Liters (2.9 US qts, 2.4 Imp. qts)*1
2.2 Liters (2.3 US qts, 1.9 Imp. qts)*2
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 29.2 kg (64.4 lb) 29.4 kg (64.8 lb)

HINT:

*1: 5-door models

*2: 3-door models



ii.

Models with 1GR-FE Engine

Transmission Type RA61F AC60F
Differential Gear Ratio 3.909 ←
Ring Gear Size 208 ←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 43 ←
No. of Differential Pinion 4*1
10*2
4*3
10*2
Oil Capacity 2.7 Liters (2.9 US qts, 2.4 Imp. qts)*1
2.55 Liters (2.6 US pts, 2.2 Imp. qts)*2
2.7 Liters (2.9 US qts, 2.4 Imp. qts)*1
2.65 Liters (2.8 US qts, 2.3 Imp. qts)*4
2.55 Liters (2.6 US pts, 2.2 Imp. qts)*2
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 28.9 kg (63.7 lb)*1
31.4 kg (69.2 lb)*2
28.9 kg (63.7 lb)*1
31.4 kg (69.2 lb)*4
31.4 kg (69.2 lb)*2

HINT:

*1: Models with BD21B type rear differential

*2: Models with BD21BT type rear differential

*3: Models with BD21B or BD21BN type rear differential

*4: Models with BD21BN type rear differential



iii.

Models with 1GD-FTV Engine

Transmission Type RA61F AC60F
Differential Gear Ratio 3.727 3.909
Ring Gear Size 208 ←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 41 43
No. of Differential Pinion 4*1
10*2
4*5
10*2
Oil Capacity 2.7 Liters (2.9 US qts, 2.4 Imp. qts)*3
2.2 Liters (2.3 US qts, 1.9 Imp. qts)*4
2.55 Liters (2.6 US pts, 2.2 Imp. qts)*2
2.7 Liters (2.9 US qts, 2.4 Imp. qts)*3
2.2 Liters (2.3 US qts, 1.9 Imp. qts)*4
2.65 Liters (2.8 US qts, 2.3 Imp. qts)*6
2.55 Liters (2.6 US pts, 2.2 Imp. qts)*2
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 28.8 kg (63.5 lb)*1
31.5 kg (69.4 lb)*2
28.9 kg (63.7 lb)*1
31.4 kg (69.2 lb)*6
31.4 kg (69.2 lb)*2

HINT:

*1: Models with BD21B type rear differential

*2: Models with BD21BT type rear differential

*3: 5-door models BD21B type rear differential

*4: 3-door models BD21B type rear differential

*5: Models with BD21B or BD21BN type rear differential

*6: Models with BD21BN type rear differential



iv.

Models with 1KD-FTV Engine

Transmission Type RA61F A750F
Differential Gear Ratio 3.909 ←
Ring Gear Size 208 ←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 43 ←
No. of Differential Pinion 4*1
10*2
4*3
10*2
Oil Capacity 2.7 Liters (2.9 US qts, 2.4 Imp. qts)*1
2.55 Liters (2.6 US pts, 2.2 Imp. qts)*2
2.7 Liters (2.9 US qts, 2.4 Imp. qts)*1
2.65 Liters (2.8 US qts, 2.3 Imp. qts)*4
2.55 Liters (2.6 US pts, 2.2 Imp. qts)*2
Oil Viscosity SAE 75W-85 ←
Oil Grade API GL-5 ←
Weight (Reference) 28.9 kg (63.7 lb)*1
31.4 kg (69.2 lb)*2
28.9 kg (63.7 lb)*1
31.4 kg (69.2 lb)*4
31.4 kg (69.2 lb)*2

HINT:

*1: Models with BD21B type rear differential

*2: Models with BD21BT type rear differential

*3: Models with BD21B or BD21BN type rear differential

*4: Models with BD21BN type rear differential



v.

Models with 5L-E

Transmission Type RA61F
Differential Gear Ratio 4.555
Ring Gear Size 208
Drive Pinion No. of Gear Teeth 9
Ring Gear No. of Gear Teeth 41
No. of Differential Pinion 4
Oil Capacity 2.7 Liters (2.9 US qts, 2.4 Imp. qts)
Oil Viscosity SAE 75W-85
Oil Grade API GL-5
Weight (Reference) 29.2 kg (64.4 lb)