Home › Engine / Hybrid System › 2TR-FE (ENGINE MECHANICAL) › ENGINE UNIT › from 2017.08
NM27T0E _51 Engine / Hybrid System _053577 2TR-FE ENGINE MECHANICAL _0260102 ENGINE UNIT UN GENERAL/CONTROL/DETAILS F

2TR-FE ENGINE MECHANICAL  ENGINE UNIT  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The 2TR-FE engine is an in-line 4-cylinder, 2.7-liter, 16-valve DOHC engine.


b.

On this engine, the Dual Variable Valve Timing-intelligent (Dual VVT-i) system, Electronic Throttle Control System-intelligent (ETCS-i), and air injection system are used. These control functions have been optimized to further improve engine performance and fuel economy, and to reduce exhaust emissions.



SPECIFICATION


No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (with Dual VVT-i)
Combustion Chamber Pentroof Type
Manifolds Cross-flow
Fuel System Sequential Multiport Fuel Injection (SFI)
Ignition System Direct Ignition System (DIS)
Displacement 2694 cm3 (164.4 cu. in.)
Bore x Stroke 95.0 mm x 95.0 mm (3.74 in. x 3.74 in.)
Compression Ratio 10.2 : 1
Max. Output [ECE-NET] 122 kW @ 5200 rpm*4
Max. Output [ECE-NET] 120 kW @ 5200 rpm*3
Max. Torque [ECE-NET] 246 N*m @ 3900 rpm
Valve Timing Intake Open -8° to 28° BTDC
Closed 72° to 36° ABDC
Exhaust Open 53° to 8° BBDC
Closed -1°to 44°ATDC
Spark Plug Manufacturer DENSO
Type FK20HR-A8
Plug Gap 0.7 mm to 0.8 mm (0.0276 in. to 0.0315 in.)
Firing Order 1 - 3 - 4 - 2
Research Octane Number 91 or higher
Octane Rating 87 or higher
Emission Regulation*2 EURO 5
EURO 4
EURO 3
Engine Service Mass (Reference)*1 157 kg (346.1 lb)

*1: Weight shows the figure with oil and coolant fully filled.

*2: Emission regulations differ by country and region.

*3: Models for Russia.

*4: Except models for Russia.


HINT:

Toyota allows the use of ethanol blended gasoline where the ethanol content is up to 10%. Make sure that the ethanol blended gasoline to be used has a Research Octane Number that follows the above.



MAIN FEATURES


a.

This engine has been able to achieve the following performance through the use of the items listed below:

i.

High performance and fuel economy


ii.

Low noise and vibration


iii.

Lightweight and compact design


iv.

Good serviceability


v.

Clean emissions

Item (1) (2) (3) (4) (5)
Engine Proper A cylinder head cover made of plastic is used. - ○ ○ - -
A taper squish shape is used for the combustion chamber. ○ - - - ○
2 balance shafts are used. - ○ - - -
The piston skirt is coated with resin. ○ ○ - - ○
A No. 1 oil pan made of aluminum alloy is used. ○ ○ ○ - -
Valve Mechanism Timing chains and chain tensioners are used. ○ - ○ - -
Valve lash adjuster assemblies are used. ○ ○ - ○ ○
Valve rocker arm sub-assemblies are used. ○ - - - ○
Intake and Exhaust System An intake manifold made of plastic is used. - - ○ - -
A linkless-type throttle body is used. - - ○ ○ -
Fuel System Long nozzle, 12-hole type fuel injector assemblies are used to improve the atomization of fuel. ○ - - - ○
Quick connectors are used to connect the fuel hose with the fuel pipe. - - - ○ -
Ignition System Long-reach type spark plugs are used. ○ - - - -
Serpentine Belt Drive System A serpentine belt drive system is used. - - ○ ○ -
Engine Control System The Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ - - - ○
The Direct Ignition System (DIS) makes ignition timing adjustment unnecessary. ○ - - ○ ○
The Dual Variable Valve Timing-intelligent (Dual VVT-i) system is used. ○ - - - ○
An air injection system is used. - - - - ○