Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type) › 2020.08–2021.06
NM27T0E _56 Audio / Visual / Telematics _053632 AUDIO / VIDEO _0441906 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) CO CONTROL F

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  CONTROL  AUDIO CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Models with 6-speaker system

*2: Models with 9-speaker system

*3: Models with windshield defroster system

*4: Models with telematics system

*5: Models without telematics system

*6: Models without windshield defroster system

*7: Models with manual transmission

*8: Models with automatic transmission

Audio Head Unit (Radio and Display Receiver Assembly)
·

Outputs the audio signal of the selected audio source to the speakers*1 or stereo component amplifier assembly*2.

·

Sends the status information of each audio source and hands-free system to the combination meter assembly.

·

Using the equipped 2.4GHz frequency band wireless LAN, communicates via Wi-Fi with a wireless LAN access point, a tethering capable mobile phone or Wi-Fi mobile router.

·

Receives operation signals from the combination meter assembly to change the audio source, make a call or take a call based on the audio source and hands-free system settings set on the multi-information display.


Speakers Output the audio sounds.
Quarter Window Assembly LH (Window Glass Antenna Wire)
·

AM

·

FM-main


·

Receives radio broadcasting signals.

·

Amplifies radio broadcasting signals from the radio antenna and sends them to the audio head unit.


Quarter Window Assembly RH (Window Glass Antenna Wire)
·

FM-sub


Receives radio broadcasting signals.
Telephone Antenna Assembly*3
·

GPS


·

Receives signals from GPS satellites and sends them to the audio head unit through the antenna divider.*4

·

Receives signals from GPS satellites and sends them to the audio head unit.*5


Antenna Divider*3*4 Distributes signals from the GPS antenna to the audio head unit.
Navigation Antenna Assembly*6
·

GPS


Receives signals from GPS satellites and sends them to the audio head unit.
Steering Pad Switch Assembly Sends operation signals from switches such as the volume switch, mode switch, seek switch and telephone switch.
Parking Brake Switch Assembly Sends the parking brake signal to the audio head unit.
Back-up Light Switch Assembly*7 Sends the R shift position signal to the audio head unit.
Park/Neutral Position Switch Assembly*8
Telephone Microphone Assembly
·

Receives the user's voice through the microphone module.

·

Recognizes speech during voice recognition system operation and sends the audio signal to the DCM*4 or audio head unit*5


No. 1 Stereo Jack Adapter Assembly Communicates with the audio head unit via a USB communication line when a USB memory device, portable audio player (USB type) or Apple product is connected.
Stereo Component Amplifier Assembly*2 Amplifies audio signals sent from the audio head unit and sends them to the speakers.
Combination Meter Assembly
·

Sends vehicle speed signals to the audio head unit, DCM*4 and stereo component amplifier assembly*2.

·

Displays the status information of each audio source, hands-free system and voice recognition system which is received from the audio head unit on the multi-information display.

·

Sends operation signals to the audio head unit when the audio source and hands-free system settings are set on the multi-information display.


DCM (Telephone Transceiver)*4
·

Sends microphone voice signals sent from the telephone microphone assembly to the audio head unit.

·

Outputs audio signals sent from the audio head unit to the speakers.

·

Transmits and receives data from the data center.




DIAGNOSIS


a.

For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.