FUNCTION OF MAIN COMPONENTS
| Item | Function | |
|---|---|---|
| Forward Recognition Camera | ·
Acquires information about a preceding vehicle, pedestrian*1 or bicyclists*1. ·
Determines whether a collision is imminent based on the information received from each sensors. Sends control signals to the skid control ECU when it determines that there is a possibility of a collision or a collision is imminent based on the information received from each sensors. ·
Controls the supply of electric current to the camera heater when the ambient temperature is low. |
|
| Camera Heater (Forward Recognition Hood with Heater Sub-assembly) | Control is performed by the forward recognition camera to supply electric current and heat the heater, preventing the windshield glass in front of the forward recognition camera from fogging up. | |
| Millimeter Wave Radar Sensor Assembly | Radiates millimeter waves forward, uses the reflected millimeter waves for detecting the presence of a vehicle ahead, the vehicle-to-vehicle distance, and the relative speed, and then transmits this information to the forward recognition camera. | |
| Center Airbag Sensor Assembly | Deceleration Sensor | Detects yaw rate and transmits a signal to the forward recognition camera. |
| Yaw Rate Sensor | ||
| Steering Angle Sensor | Detects the angle and direction of steering and transmits signals to the forward recognition camera. | |
| Speed Sensor | Detects the wheel speed and transmits signals to the skid control ECU. | |
| Park/Neutral Position Switch Assembly | Detects the shift lever position and transmits signals to the ECM. | |
| Cooler (Ambient Temp. Sensor) Thermistor | Detects the ambient temperature and transmits signals to the air conditioning amplifier assembly. | |
| Stop Light Switch Assembly | Detects the depressing of the brake pedal and transmits signal to the skid control ECU. | |
| Stop Light Control ECU Assembly | Illuminates the stop lights in accordance with the signals from the stop light switch assembly or skid control ECU. | |
| VSC OFF Switch | Disables the pre-collision braking and pre-collision brake assist operation when the switch is turned on. The PCS warning light illuminates to show that the pre-collision braking and pre-collision brake assist operations are disabled. The pre-collision warning function can still operate. | |
| Steering Pad Switch Assembly | Switches the display of multi-information display within combination meter assembly. | |
| Combination Meter Assembly | PCS Warning Light | ·
Illuminates to warn the driver in accordance with signals from the forward recognition camera. ·
Illuminates when the pre-collision system is malfunctioning. ·
Illuminates when the pre-collision system is not available due to when the pre-collision system is turned OFF or pre-collision braking and pre-collision brake assist operation are disabled using the VSC OFF switch. |
| VSC OFF Indicator Light | Illuminates when in VSC OFF mode. | |
| Master Warning Light | Illuminates to warn the driver in accordance with signals from the forward recognition camera when the pre-collision system is malfunctioning. | |
| Multi-information Display | ·
Displays a warning message to inform or warn the driver of the system condition in accordance with signals from the forward recognition camera. ·
Displays the pre-collision system setting screen. |
|
| Buzzer | ·
Sounds to warn the driver in accordance with signals from the forward recognition camera. ·
Sounds when there is a malfunction in the pre-collision system, to warn the driver that the pre-collision system will not operate. |
|
| Skid Control ECU | ·
Receives a brake assist standby request signal from the forward recognition camera and switches the brake assist to standby mode. When the master cylinder pressure signal is input, it activates the brake assist. ·
Receives a pre-collision brake request signal from the forward recognition camera and then applies the brakes. ·
Transmits vehicle speed signals to the forward recognition camera. |
|
| ECM | ·
Transmits the accelerator pedal position signal and shift position signal to the forward recognition camera. ·
Controls engine output based on the signal from the forward recognition camera. |
|
| Suspension Control ECU*2 | Controls the damping force based on the signals received from the forward recognition camera. | |
| Air Conditioning Amplifier Assembly | Transmits ambient temperature signals to the forward recognition camera. | |
| Central Gateway ECU (Network Gateway ECU) | Relays the signal between the CAN communication buses. | |
| DLC3 | The Global TechStream (GTS) can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions. | |
*1: Applicable to vehicles designed for regions that detection of pedestrians and/or bicyclists is possible
*2: Models with AVS
OPERATING CONDITION
Availability of the pedestrian detection function and bicyclist detection function depend on the region in which the vehicle was sold.
| Regions | Function Availability |
|---|---|
| Region A | The pedestrian detection function and bicyclist detection function are available |
| Region B | The pedestrian detection function and bicyclist detection function are not available |
The pre-collision system is enabled and the system determines that the possibility of a frontal collision with a detected object is high. Each function is operational at the following speeds:
Pre-collision Warning
| Detectable Objects | Vehicle Speed | Relative Speed between Your Vehicle and Object |
|---|---|---|
| Vehicles | Approximately 10 km/h to 180 km/h
(7 mph to 110 mph) |
← |
| Pedestrians and bicyclists* | Approximately 10 km/h to 80 km/h
(7 mph to 50 mph) |
← |
Pre-collision Brake Assist
| Detectable Objects | Vehicle Speed | Relative Speed between Your Vehicle and Object |
|---|---|---|
| Vehicles | Approximately 30 km/h to 180 km/h
(20 mph to 110 mph) |
← |
| Pedestrians and bicyclists* | Approximately 30 km/h to 80 km/h
(20 mph to 50 mph) |
← |
Pre-collision Braking
| Detectable Objects | Vehicle Speed | Relative Speed between Your Vehicle and Object |
|---|---|---|
| Vehicles | Approximately 10 km/h to 180 km/h
(7 mph to 110 mph) |
← |
| Pedestrians and bicyclists* | Approximately 10 km/h to 80 km/h
(7 mph to 50 mph) |
← |
*: Applicable to vehicles designed for regions that detection of pedestrians and/or bicyclists is possible
The system may not operate in the following situations:
·
If a battery terminal has been disconnected and reconnected and then the vehicle has not been driven for a certain amount of time ·
If the shift position is in R ·
When the VSC OFF indicator is illuminated (only the pre-collision warning function will be operational) |
Cancelation of the pre-collision braking
If either of the following occur while the pre-collision braking function is operating, it will be canceled:
·
The accelerator pedal is depressed strongly. ·
The steering wheel is turned sharply or abruptly. |
SYSTEM CONTROL
The forward recognition camera performs pre-collision system control based on signals from ECUs, sensors and switches.
| Control | Function |
|---|---|
|
*: Models with AVS |
|
| Pre-collision Warning | When the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the multi-information display to urge the driver to take evasive action. |
| Pre-collision Brake Assist | When the system determines that the possibility of a frontal collision is high, the system applies greater braking force in relation to how strongly the brake pedal is depressed. |
| Pre-collision Braking | If the system determines that the possibility of a frontal collision is extremely high, the brakes are automatically applied to help avoid the collision or reduce the impact of the collision. |
| Adaptive Variable Suspension (AVS) Control* | When the system determines that the possibility of a frontal collision is high, the damping force of the shock absorber is optimized to enhance vehicle response. |
The pre-collision system uses a millimeter wave radar sensor assembly and forward recognition camera to detect objects in front of your vehicle.
Depending on the region in which the vehicle was sold, the pedestrian detection function and bicyclist detection function may not be available.
The millimeter wave radar sensor assembly excels at detecting the position and speed of target objects, which allows for high-precision detection of long-distance objects and stable operation at night or in bad weather.
The forward recognition camera has superior object shape and size identification performance. However, performance deterioration can easily occur when visibility is poor. In that case, only objects inside the area illuminated by the headlights can be detected at night.
The pre-collision system inputs detection information from both the millimeter wave radar sensor assembly and forward recognition camera to ensure high recognition performance and reliability.
When there is a possibility of a collision, the pre-collision system displays messages on the multi-information display, sounds an alert using the buzzer and performs pre-collision brake assist during brake pedal operations. Also, when there is a high possibility of a collision, the system performs pre-collision braking, contributing to collision avoidance support and collision damage reduction.
When the pre-collision system performs brake control, the skid control ECU illuminates the stop lights to inform drivers behind the vehicle of brake operations.
| *1 | Forward Recognition Camera | *2 | Millimeter Wave Radar Sensor Assembly |
| *3 | Skid Control ECU | - | - |
| *a | Collision Imminent | *b | Vehicle Ahead |
| *c | Own Vehicle | - | - |
|
Forward Recognition Camera Detection Area |
|
Millimeter Wave Radar Sensor Assembly Detection Area |
Pre-collision Brake Assist
While the pre-collision system has determined that there is a high possibility of a collision, brake hydraulic pressure assistance is performed when the driver depresses the brake pedal. Also, the amount of brake hydraulic pressure assistance increases further when the system determines that there is an even higher possibility of a collision.
Pre-collision Braking
When the pre-collision system detects an object such as a vehicle or road structure in front of the vehicle and determines that the possibility of a collision is high, the system displays a warning message on the multi-information display, and sounds the buzzer to warn the driver.
When the pre-collision system determines that there is a high possibility of a collision, the system performs pre-collision braking control.
Conditions under which the system may operate even if there is no possibility of a collision
In some situations such as the following, the system may determine that there is a possibility of a frontal collision and operate.
When passing a detectable object, etc.
When changing lanes while overtaking a detectable object, etc.
When approaching a detectable object in an adjacent lane or on the roadside, such as when changing the course of travel or driving on a winding road
When rapidly closing on a detectable object, etc.
When approaching objects on the roadside, such as detectable objects, guardrails, utility poles, trees, or walls
When there is a detectable object or other object by the roadside at the entrance of a curve
When there are patterns or paint in front of your vehicle that may be mistaken for a detectable object
When the front of your vehicle is hit by water, snow, dust, etc.
When overtaking a detectable object that is changing lanes or making a right/left turn
When passing a detectable object in an oncoming lane that is stopped to make a right/left turn
When a detectable object approaches very close and then stops before entering the path of your vehicle
If the front of your vehicle is raised or lowered, such as when on an uneven or undulating road surface
When driving on a road surrounded by a structure, such as in a tunnel or on an iron bridge
When there is a metal object (manhole cover, steel plate, etc.), steps, or a protrusion in front of your vehicle
When passing under an object (road sign, billboard, etc.)
When approaching an electric toll gate barrier, parking area barrier, or other barrier that opens and closes
When using an automatic car wash
When driving through or under objects that may contact your vehicle, such as thick grass, tree branches, or a banner
When driving through steam or smoke
When driving near an object that reflects radio waves, such as a large truck or guardrail
When driving near a TV tower, broadcasting station, electric power plant, or other location where strong radio waves or electrical noise may be present
FUNCTION
The pre-collision system is equipped with a function that can change the following settings.
·
Pre-collision system on (activates) or off (does not activate) setting ·
Warning timing (Early, Middle or Late) setting |
Pre-collision System On (Activates) or Off (does Not Activate) Setting
The on (activates) or off (does not activate) setting for the pre-collision system can be selected on the multi-information display setting screen.
When the pre-collision system is set to off, the PCS warning light illuminates. At that time, the multi-information display shows that the pre-collision system is off.
| *1 | Combination Meter Assembly | *2 | Steering Pad Switch Assembly |
| *a | Multi-information Display | *b | PCS Warning Light |
The system is automatically enabled each time the ignition switch is turned to ON.
Warning Timing Changing
The warning timing of the pre-collision system can be switched on the multi-information display setting screen.
| *1 | Combination Meter Assembly | *2 | Steering Pad Switch Assembly |
| *a | Early | *b | Middle (This is the default setting.) |
| *c | Late | - | - |
The pre-collision system is set to Middle by default.
When Early is selected, the pre-collision system is set to provide a warning when there is a long distance between the vehicle and the target object it may collide with (at a timing earlier than Middle).
When Late is selected, the pre-collision system is set to provide a warning when there is a short distance between the vehicle and the target object it may collide with (at a timing later than Middle).
The selected warning sensitivity level is maintained even after the ignition switch is turned off.
DIAGNOSIS
Initial Check
The forward recognition camera performs an initial check on the system for approximately 3 seconds after the ignition switch has been turned to ON.
Monitor Function
After completing the initial check, the pre-collision system becomes ready to operate. During this time, the forward recognition camera periodically monitors the system for any malfunctions.
Diagnostic Trouble Code (DTC)
If the forward recognition camera detects a malfunction in the pre-collision system, it stores a Diagnostic Trouble Code (DTC) in memory.