Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › from 2020.08
NM27T0E _58 Vehicle Interior _093546 PRE-COLLISION _0442856 PRE-COLLISION SYSTEM DE DETAILS F

PRE-COLLISION  PRE-COLLISION SYSTEM  DETAILS  CAMERA HEATER  


CONSTRUCTION


a.

The camera heater (forward recognition hood with heater sub-assembly) is composed of the sheet heater (heating element), temperature fuse, etc. Current is run through the sheet heater (heating element) to generate heat and warm the front portion of the forward recognition camera.

Y266804C01
4.156,1.042 3.271,0.594 true 5.427,0.917 4.333,1.49 true 3.094,0.469 3.406,0.771 0.313,0.302 10 false *1 5.458,0.792 5.771,1.094 0.313,0.302 10 false *2
*1 Sheet Heater (Heating Element) *2 Temperature Fuse




OPERATION


a.

When all of the following conditions have been met, the camera heater operates.

·

The ignition switch is turned to ON.

·

The ambient temperature is 10°C (50°F) or less.

·

30 seconds or more have elapsed since camera heater operation stopped.




b.

After the camera heater operates, the operation will stop when a certain length of time has elapsed.

HINT:

Operating time will differ based on vehicle speed, battery voltage and ambient temperature.