Home › Engine / Hybrid System › 1GD-FTV (ENGINE MECHANICAL) › ENGINE UNIT › from 2020.08
NM27T0E _51 Engine / Hybrid System _053580 1GD-FTV ENGINE MECHANICAL _0260105 ENGINE UNIT UN GENERAL/CONTROL/DETAILS F

1GD-FTV ENGINE MECHANICAL  ENGINE UNIT  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The 1GD-FTV TOYOTA Direct injection 4 stroke common-rail Diesel engine (D-4D) is an in-line 4-cylinder, 2.8-liter, 16-valve DOHC, turbocharged diesel engine. This engine uses the direct injection system and common-rail system to achieve high performance, clean emissions, low noise and low vibrations.


b.

An intercooler is provided. This lowers the intake air temperature and improves power output.



SPECIFICATION


*1: Models for Russia and destination package for Ukuraine with air-cooled intercooler

*2: Except models for Russia and destination package for Ukuraine with air-cooled intercooler

*3: Emission regulations differ by country and region.

*4: Weight shows the figure with oil and water fully filled.

*5: Varies depending on the vehicle specification.

*6: Models with UREA SCR system

Engine Type 1GD-FTV
w/ Variable Nozzle Vane Type Turbocharger
w/ Solenoid Type Injector
No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive
Combustion Chamber Direct Injection Type
Manifolds Cross-flow
Fuel System Common-rail Type
Displacement 2755 cm3 (168.1 cu. in.)
Bore x Stroke 92.0 mm x 103.6 mm (3.62 in. x 4.08 in.)
Compression Ratio 15.6 : 1
Max. Output (EEC) A/T 147 kW @ 2800 to 3400 rpm*1
150 kW @ 3000 to 3400 rpm*2
M/T 150 kW @ 3000 rpm
Max. Torque (EEC) A/T 500 N*m @ 1600 to 2800 rpm
M/T 420 N*m @ 1400 to 3400 rpm
Valve Timing Intake Open 6°BTDC
Closed 29°ABDC
Exhaust Open 40°BBDC
Closed 10°ATDC
Firing Order 1 - 3 - 4 - 2
Fuel Cetane Number 48 or higher
Emission Regulation*3 -
EURO 2
EURO 3
EURO 4
EURO 5
EURO 6
EURO 6d
Engine Service Mass (Reference)*4*5 304 kg*6


MAIN FEATURES


a.

This engine is able to achieve the following through the use of the items listed below:

i.

High performance and fuel economy


ii.

Low noise and vibration


iii.

Lightweight and compact design


iv.

Good serviceability


v.

Clean emissions

Item (1) (2) (3) (4) (5)

*1: Models with air-cooled intercooler

*2: Models with UREA SCR system

*3: Models with EGR system

*4: Models with EGR system (with EGR cooler)

*5: Models with catalyst support control

A cylinder head cover sub-assembly made of plastic is used. - ○ ○ - -
An oil mist separator is used on the cylinder head cover sub-assembly. - - - - ○
A cylinder head sub-assembly made of aluminum alloy is used. - - ○ - -
A tangential port and a helical port are used on the intake port. ○ - - - ○
A piston provided with a combustion chamber is used. ○ ○ - - ○
Connecting rod sub-assemblies made of high tension material. ○ ○ ○ - -
A timing chain and a chain tensioner are used. - ○ - ○ -
Valve lash adjuster assemblies are used. - ○ - ○ -
Valve rocker arm sub-assemblies are used. ○ ○ ○ ○ -
Toyota Genuine Super Long Life Coolant (SLLC) is used. - - - ○ -
A serpentine belt drive system is used. - - ○ ○ -
A diesel throttle valve is used. ○ ○ - - ○
A variable nozzle vane type turbocharger sub-assembly is used. (Water-cooling structure) ○ - - ○ ○
An air-cooled intercooler is used.*1 ○ - - - ○
An water-cooled intercooler is used.*2 ○ - - - ○
An HP5S type injection or supply pump assembly is used. ○ ○ ○ - ○
A common-rail type fuel injection system is used. ○ ○ - - ○
An injector assembly is provided in the bore center. ○ ○ - - ○
An intake mass air flow meter sub-assembly is used. ○ - - - ○
A pilot injection control system is used. - ○ - - ○
An EGR system is used.*3 - - - - ○
An EGR cooler with bypass is used.*4 - - - - ○
An oxidation catalyst is used.*4 - - - - ○
A DPF control is used.*5 - - - - ○
An UREA SCR system is used.*2 - - - - ○
An SCR catalyst is used.*2 - - - - ○