Home › Engine / Hybrid System › 1GD-FTV (INTAKE / EXHAUST) › INTAKE SYSTEM › from 2020.08
NM27T0E _51 Engine / Hybrid System _053594 1GD-FTV INTAKE / EXHAUST _0260123 INTAKE SYSTEM UN GENERAL/CONTROL/DETAILS F

1GD-FTV INTAKE / EXHAUST  INTAKE SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


CONSTRUCTION


a.

Diesel Throttle Body

i.

A diesel throttle valve with a DC motor type throttle control motor is used to reduce exhaust gas emissions, as well as improve diesel throttle valve responsiveness and fuel economy.

W140600C01
2.479,0.323 3.104,0.615 true 2.271,0.198 2.521,0.458 0.25,0.26 10 false *1
*1 Diesel Throttle Body Assembly - -




b.

Intake Manifold

i.

The intake location for EGR gas is optimized to control differences in EGR gas volume between cylinders, improving fuel economy and reducing noise and vibration.


ii.

A curved surface is used for the intake manifold to reduce noise from the engine.

W146828E01
2.219,0.781 2.979,1.542 true 2.073,0.625 2.458,0.948 0.385,0.323 10 false *1

Text in Illustration
*1 Intake Manifold - -



c.

Intercooler

i.

Models without UREA SCR System

1.

An air-cooled intercooler assembly is used in order to lower the intake air temperature, improve engine performance and achieve cleaner exhaust gas emissions. It is located in front of the radiator assembly.

2.

The intercooler assembly is made of aluminum.

W147077C01
2.25,0.688 2.906,1.135 true 2.063,0.573 2.375,0.729 0.313,0.156 10 false *1
*1 Intercooler Assembly - -




ii.

Models with UREA SCR System

1.

A water-cooled intercooler assembly is used. Control is performed for the intake air temperature when the outside air temperature is low, enabling the introduction of EGR gas and achieving cleaner exhaust gas.

W146832C01
2.115,0.698 2.635,1.104 true 1.885,0.573 2.229,0.844 0.344,0.271 10 false *1 1.146,3.115 1.521,3.396 0.375,0.281 10 false *a 3.542,3.542 3.854,3.75 0.313,0.208 10 false *b
*1 Intercooler Assembly - -
*a From Intercooler Cooling Radiator Assembly *b To Intercooler Reserve Tank Assembly
V100135

Coolant Flow
V100136

Intake Air Flow





d.

Intercooler Cooling Radiator Assembly

i.

An intercooler cooling radiator assembly is used to cool the intercooler assembly.

W139952C01
1.979,1.729 2.969,1.729 true 1.75,1.667 2.083,2.052 0.333,0.385 10 false *1
*1 Intercooler Cooling Radiator Assembly - -




e.

Turbocharger

i.

A variable nozzle vane type turbocharger sub-assembly is used. A water jacket is provided in the bearing housing and compressor housing to improve the cooling performance of the turbocharger sub-assembly.


ii.

The shape of the turbine wheel is optimized for downsizing, improving higher rotational speed, and dynamic response and transitioning performance, as well as reducing fuel consumption and exhaust gas emissions. Also, a full-back disk is used for the turbine wheel to improve reliability of the turbine wheel and allow exhaust gas to flow smoothly to the turbine wheel, improving turbo efficiency and reducing fuel consumption.


iii.

This turbocharger sub-assembly has achieved great improvements in low-speed torque, maximum output, fuel consumption and emission reduction. These improvements have been accomplished through variable control of the nozzle vane position, and an optimal velocity of the exhaust gas inflow to the turbine at all times in response to the engine condition.


iv.

The variable nozzle vane type turbocharger sub-assembly consists primarily of a compressor wheel, turbine wheel, nozzle vane, unison ring, drive arm, driven arm, actuator (motor and nozzle vane position sensor) and nozzle vane control link.


v.

The ECM outputs a signal to the turbocharger sub-assembly, which operates the actuator, to control the nozzle vane position.

W146829C01
3.813,0.844 4.594,1.302 true 5.875,1.385 6.438,0.625 true 5.677,1.656 6.427,1.948 true 5.479,1.656 6.344,2.594 true 5.51,3.24 5.688,2.875 true 6.031,3.365 6.458,3.219 true 5.646,4.042 6.24,4.406 true 5.323,4.125 5.688,4.531 true 4.167,2.979 4.646,3.49 true 2.656,1 2.917,0.594 true 1.938,1.813 1.719,0.635 true 0.719,0.604 1.094,1.5 true 0.604,0.458 0.917,0.615 0.313,0.156 10 false *1 2.896,0.427 3.208,0.583 0.313,0.156 10 false *2 1.625,0.469 1.938,0.625 0.313,0.156 10 false *3 3.635,0.75 3.948,0.906 0.313,0.156 10 false *4 6.375,2.531 6.688,2.688 0.313,0.156 10 false *5 6.479,1.927 6.802,2.104 0.323,0.177 10 false *6 6.448,0.479 6.76,0.667 0.313,0.188 10 false *7 6.292,4.375 6.604,4.531 0.313,0.156 10 false *8 5.646,2.708 5.969,2.885 0.323,0.177 10 false *9 4.01,2.844 4.323,3.031 0.313,0.188 10 false *7 5.708,4.531 6.031,4.708 0.323,0.177 10 false *6 6.49,3.104 6.823,3.292 0.333,0.188 10 false *3
*1 Turbocharger Sub-assembly *2 Actuator
*3 Linkage *4 Compressor Wheel
*5 Unison Ring *6 Nozzle Vane
*7 Turbine Wheel *8 Drive Arm
*9 Driven Arm - -





OPERATION


a.

Turbocharger

i.

The exhaust gas from the exhaust manifold goes through the nozzle vane inside the turbocharger housing and flows to the exhaust pipe through the turbine. The speed of the turbine (supercharging pressure) differs depending on the flow velocity of the exhaust gas going through the turbine, and the flow velocity of the exhaust gas is controlled by the opening. When there is less exhaust gas, such as during idling, the nozzle vane is almost fully closed, but as there is a slight clearance between the vanes, the exhaust gas flows through this clearance to the exhaust pipe. Therefore, there is no bypass.

W123704C01
4.104,0.302 4.323,0.146 4.323,0.146 4.479,0.146 true 4.094,1.208 4.302,1.5 4.302,1.5 4.448,1.5 true 4.521,0.031 4.833,0.229 0.313,0.198 10 false *1 4.5,1.385 4.813,1.583 0.313,0.198 10 false *1
*1 Nozzle Vane - -
V100136

Intake Air
V100135

Exhaust Gas



ii.

At Low Load Range or Low Speed Range

1.

The actuator moves the linkage in the closing direction of the nozzle vanes in accordance with signals from the ECM.

2.

This results in increasing the velocity of the exhaust gas flowing to the turbine, as well as the speed of the turbine. As a result, torque is improved when the engine is running at low speeds.

W146830C01
2.99,1.365 3.781,0.594 true 3,1.594 3.719,1.958 true 6.615,2.427 6.031,2.208 true 5.5,1 5.521,1.5 true 6.052,1.156 6.292,0.802 true 5.823,1.865 6.438,1.958 true 5.563,2.677 6.031,3.052 true 5.01,2.542 4.646,2.938 true 6.063,3.063 6.375,3.219 0.313,0.156 10 false *1 4.469,2.927 4.781,3.083 0.313,0.156 10 false *2 6.479,1.906 6.792,2.063 0.313,0.156 10 false *3 5.406,0.833 5.719,0.99 0.313,0.156 10 false *4 6.667,2.385 6.979,2.542 0.313,0.156 10 false *5 6.271,0.656 6.583,0.813 0.313,0.156 10 false *6 3.771,0.458 4.083,0.615 0.313,0.156 10 false *a 3.771,1.917 4.083,2.073 0.313,0.156 10 false *1
*1 Nozzle Vane *2 Turbine Wheel
*3 Drive Arm *4 Driven Arm
*5 Unison Ring *6 Linkage
*a Exhaust Gas Flow - -




iii.

At High Load Range or Medium-to-high Speed Range

1.

The actuator moves the linkage in the opening direction of the nozzle vanes in accordance with signals from the ECM. This opens the nozzle vane and holds the specified supercharging pressure, lowering the back pressure and improving the output and fuel consumption.

W146831C01
2.938,1.406 3.781,0.594 true 3,1.594 3.719,1.958 true 6.615,2.427 5.99,2.208 true 5.5,1 5.521,1.5 true 6.01,1.198 6.292,0.802 true 5.823,1.865 6.438,1.958 true 5.563,2.677 6.031,3.052 true 5.01,2.542 4.646,2.938 true 6.063,3.063 6.375,3.219 0.313,0.156 10 false *1 4.469,2.927 4.781,3.083 0.313,0.156 10 false *2 6.479,1.906 6.792,2.063 0.313,0.156 10 false *3 5.406,0.833 5.719,0.99 0.313,0.156 10 false *4 6.667,2.385 6.979,2.542 0.313,0.156 10 false *5 6.271,0.656 6.583,0.813 0.313,0.156 10 false *6 3.771,0.458 4.083,0.615 0.313,0.156 10 false *a 3.771,1.917 4.083,2.073 0.313,0.156 10 false *1
*1 Nozzle Vane *2 Turbine Wheel
*3 Drive Arm *4 Driven Arm
*5 Unison Ring *6 Linkage
*a Exhaust Gas Flow - -