Home › Engine / Hybrid System › 1GD-FTV (LUBRICATION) › LUBRICATION SYSTEM › from 2020.08
NM27T0E _51 Engine / Hybrid System _053604 1GD-FTV LUBRICATION _0260134 LUBRICATION SYSTEM UN GENERAL/CONTROL/DETAILS F

1GD-FTV LUBRICATION  LUBRICATION SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The lubrication circuit is fully pressurized and all oil passes through an oil cooler and an oil filter.


b.

A trochoid oil pump driven by a gear engaged with the crankshaft is used.


c.

A water-cooled type engine oil cooler is located on the cylinder block.


d.

An aluminum laminate type oil cooler assembly is used to achieve weight reduction and high efficiency heat exchange.


e.

Oil nozzle sub-assemblies that lubricate and cool the piston are provided.


f.

A 2-stage oil pressure switching oil pump, which reduces the operation force of the oil pump and the amount of friction that occurs when quickly warming up the pistons when the engine is cold or running at light load, is used to improve fuel efficiency.*

*: Models with 2-stage oil pressure switching oil pump


W147282C01
4.344,2.344 5.427,2.135 true 4.167,3.948 4.906,4.135 true 1.219,2.542 2.552,2.531 true 1.448,3.396 2.438,3.073 true 3.271,4.115 3.844,2.542 true 1.042,2.479 1.354,2.635 0.313,0.156 10 false *1 1.25,3.333 1.563,3.49 0.313,0.156 10 false *2 3.135,4.135 3.448,4.292 0.313,0.156 10 false *3 4.969,4.094 5.281,4.25 0.313,0.156 10 false *4 5.49,2.042 5.802,2.198 0.313,0.156 10 false *5
*1 Oil Cooler Assembly *2 Timing Chain Cover Sub-assembly
·

Oil Pump


*3 Oil Filter Sub-assembly *4 Oil Strainer Sub-assembly
*5 No. 1 Oil Nozzle Sub-assembly - -