OPERATION
The combination meter assembly receives the idling on/off signals from the engine stop and start ECU.
The stop and start system settings displayed on the multi-information display can be changed by operating the steering pad switch assembly.
The system operation status or warning information is indicated to the driver through the following means:
Illuminating or flashing the stop and start indicator and stop and start cancel indicator in the combination meter assembly.
Sounding a buzzer.
Displaying other information on the multi-information display.
| *a | Stop and Start Indicator | *b | Stop and Start Cancel Indicator |
| *c | Multi-information Display | - | - |
| Item | Condition | Stop and Start Indicator Light | Buzzer |
|---|---|---|---|
|
*: The blinking interval is 0.5 seconds. |
|||
| System Operating (Engine is stopped) | The vehicle is operating normally. | Illuminates | Does not sound |
| The driver's door is opened with the shift lever in D. | Blinks* | Sounds | |
| Condition | Stop and Start Cancel Indicator Light |
|---|---|
|
*: The blinking interval is 0.5 seconds. |
|
| The vehicle is stopped and system operation conditions are met. | Does not illuminate |
| When the stop and start cancel switch is on. | Illuminates |
| When any Diagnostic Trouble Code (DTCs) are detected. | Blinks* |
| When the number of times the starter assembly has been operated exceeds the threshold. | |
Multi-information Display Operation
An indicator and/or messages are displayed to indicate condition of the stop and start system when certain vehicle conditions are met.
| Stop and Start System Condition | Multi-information Display Message* | Vehicle Condition | |
|---|---|---|---|
|
*: Message are listed in the order of priority. |
|||
| When the engine cannot be stopped by the stop and start system |
|
"Non-Dedicated Battery" | A non-specified battery for the stop and start system may have been installed. |
| "Battery Charging" | ·
The battery charge amount may be low. ·
A refresh charge may be occurring. |
||
| "Stop & Start Unavailable" | The engine may have been started with the hood opened. | ||
| "System Temperature Low" | The battery may be cold. | ||
| "System Temperature High" | The battery may be extremely hot. | ||
| "For Climate Control" | ·
The air conditioning system is being used when the ambient temperature is high or low. ·
Windshield defogger is pressed. |
||
| "Driver Seat Belt Unbuckled" | The driver seat belt is not fastened. | ||
| "Steering Wheel Turned" | The steering wheel is being turned. | ||
| "Depress Brake Firmly to Activate" | The brake pedal is not depressed enough. | ||
| When the engine automatically restarts while stopped by the stop and start system |
|
"Driver Seat Belt Unbuckled" | The driver seat belt is not fastened. |
| "Steering Wheel Turned" | The steering wheel is turned. | ||
| "For Climate Control" | ·
The air conditioning system is turned on or the air conditioning is being used. ·
Windshield defogger is turned on. |
||
| "Battery Charging" | The battery charge amount may be low. | ||
| The system may be malfunctioning | - | "Stop & Start System Malfunction. Visit Your Dealer" | - |