CONSTRUCTION
The backup boost converter uses a semiconductor relay. The semiconductor relay also functions as a fuse. When overcurrent is detected, the relay is turned off to protect the circuit.
The backup boost converter supplies battery voltage to help make up for the voltage drop that occurs when the engine is restarted. This prevents the operation of the following equipment from being interrupted due to low battery voltage.
Navigation ECU Assembly
Radio receiver Assembly
Radio and display receiver Assembly
Integration Control and Panel Assembly
Steering Sensor
Skid Control ECU
Combination Meter Assembly
Central Gateway ECU (Network Gateway ECU)
Air Conditioning Control Assembly
Blind Spot Monitor Sensor LH/RH
Parking Assist ECU
Tire Pressure Warning ECU and Receiver
Millimeter Wave Radar Sensor Assembly
Main Body ECU (Multiplex Network Body ECU)
Varies depending on the vehicle specification.
An external backup boost converter (eco run vehicle converter assembly) is used.
When the audio system is used during idle stop, the external backup boost converter (eco run vehicle converter assembly) compensates for the voltage drop to supplement audio playback by stabilizing the sound quality.