CONSTRUCTION
The T-115 type battery is a suitable battery for the repeated engine starts that are performed by the stop and start system.
Use a genuine battery specifically designed for use with the stop and start system or a battery with equivalent specification to a genuine battery. If an unsupported battery is used, stop and start system functions may be restricted to protect the battery. Also, battery performance may decrease and the engine may not be able to restart.
SPECIFICATION
| Item | Specification |
|---|---|
|
*: Value indicates low-temperature starting performance. |
|
| Battery Type | T-115 |
| Rated Voltage (V) | 12 |
| 20 Hour Rate Capacity (20HR) (Ah) | 80 |
| Cold Cranking Ampere (CCA)* (A) | 776 |
| Exhaust Method | Each Cell |
| Indicator | Not Equipped |
| Item | Specification |
|---|---|
|
*1: 2 batteries are used depending on the model. *2: Value indicates low-temperature starting performance. |
|
| Battery Type | 85D26L (85D26L + 85D26R *1) |
| Rated Voltage (V) | 12 |
| 20 Hour Rate Capacity (20HR) (Ah) | 65 (65 + 65 *1) |
| Cold Cranking Ampere (CCA)*2 (A) | 640 |
| Exhaust Method | Each Cell |
| Indicator | Not Equipped |