OUTLINE
Toyota Safety Sense
The preventive safety package "Toyota Safety Sense" is used to support safe driving.
Systems that are included in "Toyota Safety Sense" are as follows:
|
*: Models with road sign assist system |
|
| Toyota Safety Sense | ·
Pre-collision System (PCS) ·
Dynamic Radar Cruise Control System ·
Lane Departure Alert (LDA) System ·
Road Sign Assist (RSA) System* ·
Automatic High Beam (AHB) |
Pre-collision System (PCS)
The pre-collision system uses a millimeter wave radar sensor assembly and forward recognition camera to detect objects in front of the vehicle. When the system determines that the possibility of a frontal collision with an object is high, a warning operates to urge the driver to take evasive action and the potential brake pressure is increased to help the driver avoid the collision. If the system determines that the possibility of a frontal collision with an object is extremely high, the brakes are automatically applied to help avoid the collision or help reduce the impact of the collision.
The pre-collision system can be disabled/enabled and the warning timing can be changed.
| Regions | Detectable Objects | Destinations / Countries |
|---|---|---|
|
*1: Expect destination package model options for Azerbaijan, Georgia, Ecuador or Costa Rica *2: Expect destination package model options for Uruguay, Guyana, Guatemala, Jamaica, Suriname, Nicaragua, Haiti, Peru, Bolivia, Honduras or R. Dominican *3: Expect destination package model options for Myanmar, Belize, Panama, Paraguay, Chile or Colombia *4: Expect destination package model options for Armenia *5: Expect destination package model options for Brunei |
||
| Region A | ·
Vehicles ·
Pedestrians ·
Bicyclists |
·
Europe*1 ·
Australia*2 ·
G.C.C. Countries*3 ·
Russia*4 ·
South Africa ·
Brunei |
| Region B | ·
Vehicles |
·
General Countries*5 ·
Azerbaijan ·
Georgia ·
Ecuador ·
Costa Rica ·
Uruguay ·
Guyana ·
Guatemala ·
Jamaica ·
Suriname ·
Nicaragua ·
Haiti ·
Peru ·
Bolivia ·
Honduras ·
R. Dominican ·
Myanmar ·
Belize ·
Panama ·
Paraguay ·
Chile ·
Colombia ·
Armenia |
If the pre-collision system determines that the possibility of a collision is high, pre-collision warning control and pre-collision brake assist control are performed, and if a collision is imminent, pre-collision braking control will be performed to help avoid and reduce the impact of the collision.
PRECAUTION
Toyota Safety Sense
The Toyota Safety Sense is designed to operate under the assumption that the driver will drive safely, and is designed to help reduce the impact to the occupants and the vehicle in the case of a collision or assist the driver in normal driving conditions.
As there is a limit to the degree of recognition accuracy and control performance that this system can provide, do not overly rely on this system. The driver is always responsible for paying attention to the vehicle's surroundings and driving safely.
To avoid malfunction of the millimeter wave radar sensor assembly
Observe the following precautions. Otherwise, the millimeter wave radar sensor assembly may not operate properly, possibly leading to an accident resulting in death or serious injury.
Keep the millimeter wave radar sensor assembly and the radar sensor cover clean at all times.
If the front of the millimeter wave radar sensor assembly or the front or back of the radar sensor cover is dirty or covered with water droplets, snow, etc., clean it.
Clean the millimeter wave radar sensor assembly and radar sensor cover with a soft cloth to avoid damaging them.
| *1 | Radar Sensor Cover | *2 | Millimeter Wave Radar Sensor Assembly |
Do not attach accessories, stickers (including transparent stickers) or other items to the millimeter wave radar sensor assembly, radar sensor cover or surrounding area.
Do not subject the millimeter wave radar sensor assembly or surrounding area to a strong impact.
Do not disassemble the millimeter wave radar sensor assembly.
Do not modify or paint the millimeter wave radar sensor assembly or radar sensor cover.
In the following cases, the millimeter wave radar sensor assembly must be recalibrated.
When the millimeter wave radar sensor assembly or front grille are removed and installed, or replaced
When the front bumper is replaced
The millimeter wave radar sensor assembly complies with relevant radio wave regulations, as shown by the label attached to the millimeter wave radar sensor assembly. Do not remove the label. Additionally, disassembly or modification of the millimeter wave radar sensor assembly may be prohibited by law.
Do not erase the letters printed on the millimeter wave radar sensor assembly.
Use a dedicated radar sensor cover for the millimeter wave radar sensor assembly.
To avoid malfunction of the forward recognition camera
Observe the following precautions. Otherwise, the forward recognition camera may not operate properly, possibly leading to an accident resulting in death or serious injury.
Keep the windshield clean at all times.
If the windshield is dirty or covered with an oily film, water droplets, snow, etc., clean the windshield.
If a glass coating agent is applied to the windshield, it will still be necessary to use the windshield wipers to remove water droplets, etc. from the area of the windshield in front of the forward recognition camera.
Do not attach objects, such as stickers, transparent stickers, etc., to the outer side of the windshield in front of the forward recognition camera (shaded area in the illustration).
| *a | From the top of the windshield to approximately 10 mm (0.394 in.) below the bottom of the front camera. | *b | Approximately 200 mm (7.87 in.) (Approximately 100 mm (3.94 in.) to the right and left from the center of the front camera). |
If the part of the windshield in front of the forward recognition camera is fogged up or covered with condensation, or ice, use the windshield defogger to remove the fog, condensation, or ice.
If water droplets cannot be properly removed from the area of the windshield in front of the forward recognition camera by the windshield wipers, replace the wiper insert or wiper blade.
Do not attach window tinting to the windshield.
Replace the windshield if it is damaged or cracked. After replacing the windshield, the forward recognition camera must be recalibrated.
Do not allow liquids to contact the forward recognition camera.
Do not allow bright lights to shine into the forward recognition camera.
Do not dirty or damage the forward recognition camera. When cleaning the inside of the windshield, do not allow glass cleaner to contact the lens of the forward recognition camera. Also, do not touch the lens.
Do not subject the forward recognition camera to a strong impact.
Do not change the installation position or direction of the forward recognition camera or remove it.
Do not disassemble the forward recognition camera.
Do not modify any components of the vehicle around the forward recognition camera (inside rear view mirror, etc.) or ceiling.
Do not attach any accessories to the hood, front grille or front bumper that may obstruct the forward recognition camera.
If a surfboard or other long object is to be mounted on the roof, make sure that it will not obstruct the forward recognition camera.
Do not modify the headlights or other lights.
If a warning message is displayed on the multi-information display
A system may be temporarily unavailable or there may be a malfunction in the system.
In the following situations, perform the actions specified in the table. When the normal operating conditions are detected, the message will disappear and the system will become operational.
| Situation | Actions |
|---|---|
| When the area around a forward recognition camera is covered with dirt, moisture (fogged up, covered with condensation, ice, etc.), or other foreign matter | To clean the part of the windshield in front of the forward recognition camera, use the windshield wipers or the windshield defogger of the air conditioning system |
| When the temperature around the forward recognition camera is outside of the operational range, such as when the vehicle is in the sun or in an extremely cold environment | If the forward recognition camera is hot, such as after the vehicle had been parked in the sun, use the air conditioning system to decrease the temperature around the forward recognition camera.
·
If a sunshade was used when the vehicle was parked, depending on its type, the sunlight reflected from the surface of the sunshade may cause the temperature of the forward recognition camera to become excessively high. |
| If the forward recognition camera is cold, such after the vehicle is parked in an extremely cold environment, use the air conditioning system to increase the temperature around the forward recognition camera. | |
| The area in front of the forward recognition camera is obstructed, such as when the hood is open or a sticker is attached to the part of the windshield in front of the forward recognition camera. | Close the hood, remove the sticker, etc. to clear the obstruction. |
In the following situations, if the situation has changed (or the vehicle has been driven for some time) and the normal operating conditions are detected, the message will disappear and the system will become operational.
·
When the temperature around the millimeter wave radar sensor assembly is outside of the operational range, such as when the vehicle is in the sun or in an extremely cold environment ·
When the forward recognition camera cannot detect objects in front of the vehicle, such as when driving in the dark, snow, or fog, or when bright lights are shining into the forward recognition camera |
Limitations of the pre-collision system
The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. Do not use the pre-collision system instead of normal braking operations under any circumstances. This system will not prevent collisions or lessen collision damage or injury in every situation. Do not overly rely on this system. Failure to do so may lead to an accident, resulting in death or serious injury.
Although this system is designed to help avoid a collision or help reduce the impact of the collision, its effectiveness may change according to various conditions, therefore the system may not always be able to achieve the same level of performance. Do not overly rely on this system and always drive carefully.
Do not attempt to test the operation of the pre-collision system yourself. Depending on the objects used for testing (dummies, cardboard objects imitating detectable objects, etc.), the system may not operate properly, possibly leading to an accident.
Pre-collision braking
When the pre-collision braking function is operating, a large amount of braking force will be applied.
If the vehicle is stopped by the operation of the pre-collision braking function, the pre-collision braking function operation will be canceled after approximately 2 seconds. Depress the brake pedal as necessary.
The pre-collision braking function may not operate if certain operations are performed by the driver. If the accelerator pedal is being depressed strongly or the steering wheel is being turned, the system may determine that the driver is taking evasive action and possibly prevent the pre-collision braking function from operating.
In some situations, while the pre-collision braking function is operating, operation of the function may be canceled if the accelerator pedal is depressed strongly or the steering wheel is turned and the system determines that the driver is taking evasive action.
If the brake pedal is being depressed, the system may determine that the driver is taking evasive action and possibly delay the operation timing of the pre-collision braking function.
When to disable the pre-collision system
In the following situations, disable the system, as it may not operate properly, possibly leading to an accident resulting in death or serious injury:
When the vehicle is being towed
When your vehicle is towing another vehicle
When transporting the vehicle via truck, boat, train or similar means of transportation
When the vehicle is raised on a lift with the engine running and the tires are allowed to rotate freely
When inspecting the vehicle using a drum tester such as a chassis dynamometer or speedometer tester, or when using an on-vehicle wheel balancer
When a strong impact is applied to the front bumper or front grille, due to an accident or other reasons
If the vehicle cannot be driven in a stable manner, such as when the vehicle has been in an accident or is malfunctioning
When the vehicle is driven in a sporty manner or off-road
When the tires are not properly inflated
When the tires are very worn
When tires of a size other than specified are installed
When tire chains are installed
When a compact spare tire or an emergency tire puncture repair kit is used
If equipment (snow plow, etc.) that may obstruct the millimeter wave radar sensor assembly or forward recognition camera is temporarily installed to the vehicle
Object detection function
The system detects objects based on their size, profile, motion, etc. However, an object may not be detected depending on the surrounding brightness and the motion, posture, and angle of the detected object, preventing the system from operating properly. The illustration shows an image of detectable objects.
Region A
Region B
Situations in which the system may not operate properly
In some situations such as the following, an object may not be detected by the millimeter wave radar sensor assembly and forward recognition camera, preventing the system from operating properly:
When a detectable object is approaching your vehicle
When your vehicle or a detectable object is wobbling
If a detectable object makes an abrupt maneuver (such as sudden swerving, acceleration or deceleration)
When your vehicle approaches a detectable object rapidly
When a detectable object is not directly in front of your vehicle
When a detectable object is near a wall, fence, guardrail, manhole cover, vehicle, steel plate on the road, etc.
When a detectable object is under a structure
When part of a detectable object is hidden by an object, such as large baggage, an umbrella, or guardrail
When multiple detectable objects are close together
If the sun or other light is shining directly on a detectable object
When a detectable object is a shade of white and looks extremely bright
When a detectable object appears to be nearly the same color or brightness as its surroundings
If a detectable object cuts or suddenly emerges in front of your vehicle
When the front of your vehicle is hit by water, snow, dust, etc.
When a very bright light ahead, such as the sun or the headlights of oncoming traffic, shines directly into the forward recognition camera
When approaching the side or front of a vehicle ahead
If a vehicle ahead is a bicycle*1 or motorcycle
If a vehicle ahead is narrow, such as a personal mobility vehicle
If a preceding vehicle has a small rear end, such as an unloaded truck
If a preceding vehicle has a low rear end, such as a low bed trailer
If a vehicle ahead has extremely high ground clearance
If a vehicle ahead is carrying a load which protrudes past its rear bumper
If a vehicle ahead is irregularly shaped, such as a tractor or side car
If a vehicle ahead is a child sized bicycle, a bicycle that is carrying a large load, a bicycle ridden by more than one person, or a uniquely shaped bicycle (bicycle with a child seat, tandem bicycle, etc.)*2
If a pedestrian/or the riding height of a bicyclist ahead is shorter than approximately 1 m (3.2 ft.) or taller than approximately 2 m (6.5 ft.)*2
If a pedestrian/bicyclist is wearing oversized clothing (a rain coat, long skirt, etc.), making their silhouette obscure*2
If a pedestrian is bending forward or squatting or bicyclist is bending forward*2
If a pedestrian/bicyclist is moving fast*2
If a pedestrian is pushing a stroller, wheelchair, bicycle or other vehicle*2
When driving in inclement weather such as heavy rain, fog, snow or a sandstorm
When driving through steam or smoke
When the surrounding area is dim, such as at dawn or dusk, or while at night or in a tunnel, making a detectable object appear to be nearly the same color as its surroundings
When driving in a place where the surrounding brightness changes suddenly, such as at the entrance or exit of a tunnel
After the engine has started the vehicle has not been driven for a certain amount of time
While making a left/right turn and for a few seconds after making a left/right turn
While driving on a curve and for a few seconds after driving on a curve
If your vehicle is skidding
If the front of the vehicle is raised or lowered
If the wheels are misaligned
If a wiper blade is blocking the forward recognition camera
The vehicle is being driven at extremely high speeds
When driving on a hill
If the millimeter wave radar sensor assembly or forward recognition camera is misaligned
*1: Applicable to vehicles designed for countries/areas that detection of bicyclists is not possible
*2: Applicable to vehicles designed for countries/areas that detection of pedestrians and/or bicyclists is possible
In some situations such as the following, sufficient braking force may not be obtained, preventing the system from performing properly:
If the braking functions cannot operate to their full extent, such as when the brake parts are extremely cold, extremely hot, or wet
If the vehicle is not properly maintained (brakes or tires are excessively worn, improper tire inflation pressure, etc.)
When the vehicle is being driven on a gravel road or other slippery surface
If VSC is disabled
If VSC is disabled, the pre-collision brake assist and pre-collision braking functions are also disabled.
The PCS warning light will turn on and "VSC Turned OFF Pre-Collision Brake System Unavailable" will be displayed on the multi-information display.