Home › General › SPECIFICATIONS › 2TR-FE BATTERY / CHARGING
RM27T0E _V1 General _053654 SPECIFICATIONS _0260320 2TR-FE BATTERY / CHARGING F

SPECIFICATIONS  2TR-FE BATTERY / CHARGING  SERVICE DATA  


CHARGING SYSTEM
Battery Standard Specific gravity 1.25 to 1.29 at 20°C (68°F)
Standard voltage 1.25 to 1.29 V at 20°C (68°F)
Fuse Standard resistance Below 1 Ω
Charging circuit without load Standard current 10 A or higher
Standard voltage 12.1 to 15.4 V
(when engine speed at 2000 rpm)
Charging circuit with load Standard current 30 A or higher

GENERATOR BRUSH HOLDER ASSEMBLY
Generator brush holder Standard exposed length 9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum exposed length 4.5 mm (0.177 in.)

GENERATOR ROTOR ASSEMBLY
Generator rotor Standard resistance Between the slip rings 1.8 to 2.2 Ω
Between the slip ring and rotor core 10 kΩ or higher
Standard diameter 14.2 to 14.8 mm (0.559 to 0.583 in.)
Minimum diameter 14.0 mm (0.551 in.)

HARNESS AND CONNECTOR
Tester Connection Condition Specified Condition
C154-16 (LIN) - C157-2 (LIN) Always Below 1 Ω
C154-16 (LIN) - C157-2 (LIN) - Body ground Ignition switch off
(while LIN communication is stopped)
10 kΩ or higher