RM27T0E
_V1
General
_053654
SPECIFICATIONS
_0260345
POWER ASSIST SYSTEMS
F
SPECIFICATIONS POWER ASSIST SYSTEMS SERVICE DATA
Power Steering Drive Belt (for 5L-E)
| Drive belt deflection (New belt)
|
8.0 to 10 mm (0.315 to 0.393 in.)
|
| Drive belt deflection (Used belt)
|
10 to 15 mm (0.394 to 0.590 in.)
|
| Drive belt tension (New belt)
|
441 to 539 N
(45 to 55 kgf, 99.2 to 121 lbf)
|
| Drive belt tension (Used belt)
|
196 to 343 N
(20 to 35 kgf, 44.1 to 77.1 lbf)
|
Power Steering Fluid
| Fluid level rise (Maximum)
|
5.0 mm (0.197 in.)
|
| Fluid pressure at idle speed with valve closed
|
8300 to 8800 kPa (84.7 to 89.7 kgf/cm2, 1204 to 1276 psi)
|
| Fluid pressure at idle speed with valve fully open and turn steering wheel to full lock position
|
8300 to 8800 kPa (84.7 to 89.7 kgf/cm2, 1204 to 1276 psi)
|
Vane Pump (for 1GR-FE, 1KD-FTV, 2TR-FE, 1GD-FTV)
| Vane pump shaft and vane pump housing oil clearance (Maximum)
|
0.07 mm (0.00276 in.)
|
| Vane plate thickness (Standard)
|
1.405 to 1.411 mm (0.0554 to 0.0555 in.)
|
| Clearance between vane pump rotor groove and vane pump plate (Maximum)
|
0.025 mm (0.00098 in.)
|
| Compression spring free length (Minimum) (for 2TR-FE with out VSC)
|
29.2 mm (1.15 in.)
|
| Vane pump rotating torque
|
0.3 N*m (3 kgf*cm, 2 in.*lbf) or less
|
Vane Pump (for 5L-E)
| Vane pump shaft and vane pump housing oil clearance (Maximum)
|
0.07 mm (0.00276 in.)
|
| Vane plate thickness (Standard)
|
1.397 to 1.403 mm (0.0550 to 0.0552 in.)
|
| Clearance between vane pump rotor groove and vane pump plate (Maximum)
|
0.033 mm (0.0013 in.)
|
| Vane pump rotating torque
|
0.3 N*m (3 kgf*cm, 2 in.*lbf) or less
|
| Flow control valve compression spring length (Minimum)
|
32.3 mm (1.28 in.)
|