Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE
RM27T0E _51 Engine / Hybrid System _053656 2TR-FE ENGINE CONTROL _0260404 CAMSHAFT OIL CONTROL VALVE G

2TR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 11101J 1.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

for Intake Side:

i.

Connect the GTS to the DLC3.


ii.

Start the engine.


iii.

Turn the GTS on.


iv.

Warm up the engine.


v.

Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Linear (Bank 1).


vi.

Check the engine speed while operating the camshaft timing oil control valve assembly using the GTS.

Specified Condition:
GTS Operation Specified Condition
0% Normal engine speed
100% Engine idles roughly or stalls


If the result is not as specified, check the camshaft timing oil control valve assembly, wiring and ECM.



b.

for Exhaust Side:

i.

Connect the GTS to the DLC3.


ii.

Start the engine.


iii.

Turn the GTS on.


iv.

Warm up the engine.


v.

Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Exhaust Linear (Bank 1).


vi.

Check the engine speed while operating the camshaft timing oil control valve assembly using the GTS.

Specified Condition:
GTS Operation Specified Condition
0% Normal engine speed
100% Engine idles roughly or stalls


If the result is not as specified, check the camshaft timing oil control valve assembly, wiring and ECM.