78110K
1.INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Engine and ECT / Data List / Accel Sensor Out No. 1, Accel Sensor Out No. 2.
When depressing or releasing the accelerator pedal, check that the values of Accel Sensor Out No. 1 and Accel Sensor Out No. 2 are within the specification.
| Item | Condition | Specified Condition |
|---|---|---|
| Accel Sensor Out No. 1 | Released | 0.5 to 1.1 V |
| Depressed | 2.6 to 4.5 V | |
| Accel Sensor Out No. 2 | Released | 1.2 to 2.0 V |
| Depressed | 3.4 to 4.75 V |
If the result is not as specified, check the accelerator pedal sensor assembly, wire harness and ECM.