Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › KNOCK SENSOR
RM27T0E _51 Engine / Hybrid System _053656 2TR-FE ENGINE CONTROL _0260413 KNOCK SENSOR G

2TR-FE ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (Ground) - 2 (Output) 20°C (68°F) 120 to 280 kΩ


If the result is not as specified, replace the knock sensor.