Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › AIR FUEL RATIO SENSOR
RM27T0E _51 Engine / Hybrid System _053656 2TR-FE ENGINE CONTROL _0260414 AIR FUEL RATIO SENSOR G

2TR-FE ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

a.

Check the resistance.

i.
A112089E05
2.729,0.443 3.152,0.595 0.423,0.152 10 HA1A 0.46,0.443 0.690,0.595 0.230,0.152 10 +B 0.307,1.919 0.666,2.071 0.358,0.152 10 A1A- 2.048,1.077 2.601,0.524 2.601,0.524 2.713,0.524 false 1.398,1.077 0.845,0.524 0.845,0.524 0.733,0.524 false 1.404,1.562 0.852,1.994 0.852,1.994 0.74,1.994 false 0.083,0.063 0.290,0.219 0.207,0.156 10 *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Air Fuel Ratio Sensor)

If the result is not as specified, replace the air fuel ratio sensor.