Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › HEATED OXYGEN SENSOR
RM27T0E _51 Engine / Hybrid System _053656 2TR-FE ENGINE CONTROL _0260415 HEATED OXYGEN SENSOR G

2TR-FE ENGINE CONTROL  HEATED OXYGEN SENSOR  INSPECTION  


PROCEDURE

Hide 89465 1.INSPECT HEATED OXYGEN SENSOR

a.
A119369E20
0.099,0.072 0.270,0.226 0.171,0.155 10 *a 2.537,0.755 2.938,0.909 0.401,0.155 10 HT1B 0.688,0.755 0.912,0.909 0.224,0.155 10 +B 0.714,1.734 0.917,1.889 0.203,0.155 10 E2 1.954,1.193 2.412,0.841 2.412,0.841 2.527,0.841 false 1.535,1.193 1.077,0.841 1.077,0.841 0.963,0.841 false 1.535,1.518 1.077,1.828 1.077,1.828 0.963,1.828 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HT1B) - 2 (+B) 20°C (68°F) 5 to 8 Ω
1 (HT1B) - 4 (E2) Always 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Heated Oxygen Sensor)

If the result is not as specified, replace the heated oxygen sensor.