Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE
RM27T0E _51 Engine / Hybrid System _053657 1GR-FE ENGINE CONTROL _0260422 CAMSHAFT OIL CONTROL VALVE G

1GR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

Connect the intelligent tester to the DLC3.


b.

Start the engine.


c.

Turn the intelligent tester on.


d.

Inspect the oil control valve (for intake camshaft).

i.

Enter the following menus: Powertrain / Engine / Active Test / Control the VVT System (Bank 1).


ii.

Operate the oil control valve using the intelligent tester, and then check the engine speed.

OK:
Control Range Specified Condition
OFF Normal engine speed
ON Rough idle or engine stalls soon after oil control valve switched from OFF to ON


If the operation is not as specified, check the oil control valve, wire harness and ECM.


iii.

Enter the following menus: Powertrain / Engine / Active Test / Control the VVT System (Bank 2).


iv.

Operate the oil control valve using the intelligent tester, and then check the engine speed.

OK:
Control Range Specified Condition
OFF Normal engine speed
ON Rough idle or engine stalls soon after oil control valve switched from OFF to ON


If the operation is not as specified, check the oil control valve, wire harness and ECM.



e.

Inspect the oil control valve (for exhaust camshaft).

i.

Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 1).


ii.

Operate the oil control valve using the intelligent tester, and then check the engine speed.

OK:
Control Range Specified Condition
-100% Normal engine speed
100% Rough idle or engine stalls soon after oil control valve switched to 100%


If the operation is not as specified, check the oil control valve, wire harness and ECM.


iii.

Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 2).


iv.

Operate the oil control valve using the intelligent tester, and then check the engine speed.

OK:
Control Range Specified Condition
-100% Normal engine speed
100% Rough idle or engine stalls soon after oil control valve switched to 100%


If the operation is not as specified, check the oil control valve, wire harness and ECM.