Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › ACCELERATOR PEDAL
RM27T0E _51 Engine / Hybrid System _053657 1GR-FE ENGINE CONTROL _0260425 ACCELERATOR PEDAL A

1GR-FE ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 78110K 1.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.


a.
A221411

Disconnect the accelerator pedal position sensor connector.


b.

Remove the 2 nuts and accelerator pedal sensor.

NOTICE:
·

Avoid physical shocks to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.