Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › KNOCK SENSOR
RM27T0E _51 Engine / Hybrid System _053657 1GR-FE ENGINE CONTROL _0260431 KNOCK SENSOR A

1GR-FE ENGINE CONTROL  KNOCK SENSOR  REMOVAL  


PROCEDURE

Hide 11101 1.REMOVE CYLINDER HEAD SUB-ASSEMBLY (for Bank 1)

Hide 16332 2.REMOVE NO. 1 WATER OUTLET PIPE

a.
A227937

Detach the 3 wire harness clamps.


b.

Remove the 2 nuts, bolt and water outlet pipe.


Hide 3.REMOVE KNOCK SENSOR

a.
A075662

Disconnect the 2 sensor connectors.


b.

Remove the 2 bolts and 2 sensors.