Home › Engine / Hybrid System › 1KD-FTV (ENGINE CONTROL) › ACCELERATOR PEDAL › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053659 1KD-FTV ENGINE CONTROL _0260448 ACCELERATOR PEDAL A

1KD-FTV ENGINE CONTROL  ACCELERATOR PEDAL  INSTALLATION  


PROCEDURE

Hide 78110K 1.INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
·

This accelerator pedal does not require lubrication.

·

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.

·

Avoid excessive force to the accelerator pedal sensor.

·

Do not disassemble the accelerator pedal sensor assembly.



a.

Install the accelerator pedal with the 2 nuts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


b.

Connect the accelerator pedal sensor connector.