Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › NITROGEN OXIDES SENSOR › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260460 NITROGEN OXIDES SENSOR A

1GD-FTV ENGINE CONTROL  NITROGEN OXIDES SENSOR  REMOVAL  


PROCEDURE

Hide 89439K 1.REMOVE NO. 3 SENSOR BRACKET

A353017

a.

Remove the 2 bolts and No. 3 sensor bracket.


Hide 89463A 2.REMOVE NITROGEN OXIDES SENSOR

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A353018

Remove the 2 bolts, detach the connector and 3 clamps, and then disconnect the harness and controller portion (No. 1 sensor bracket).


b.
A353019E02
1.167,1.24 0.865,1.635 0.865,1.635 0.74,1.635 true 0.427,1.552 0.792,1.771 0.365,0.219 10 true SST

Using SST, remove the nitrogen oxides sensor.

SST
09922-10010  


c.
A353021

Remove the 2 nuts, detach the 2 clamps, and then remove the No. 1 sensor bracket from the nitrogen oxides sensor.