Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ECD SYSTEM (w/ Urea SCR System) › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260461 ECD SYSTEM(w/ Urea SCR System) C

1GD-FTV ENGINE CONTROL  ECD SYSTEM(w/ Urea SCR System)  P0545  Exhaust Gas Temperature Sensor Circuit Low (Bank 1 Sensor 1)  P0546  Exhaust Gas Temperature Sensor Circuit High (Bank 1 Sensor 1)  


DESCRIPTION

A243953E13
5.698,4.677 5.896,4.677 false 1.76,5.427 1.875,5.427 false 1.531,2.604 1.094,2.99 false 1.531,1.698 1.198,1.063 1.198,1.063 1.104,1.063 false 2.24,1.344 2.854,0.302 2.854,0.302 4,0.302 false 2.417,2.865 3.844,3.365 3.844,3.365 4.042,3.365 false 2.448,2.042 4.479,2.208 4.479,2.208 4.594,2.208 false 4.146,0.219 6.229,0.76 2.083,0.542 10 false Exhaust Gas Temperature Sensor (B1S1) 1.521,0.552 2.365,0.823 0.844,0.271 10 false Exhaust Gas 3.167,0.969 3.531,1.24 0.365,0.271 10 false ECM 0.198,2.906 1.063,3.333 0.865,0.427 10 false DPF Catalytic Converter 4.635,2.125 7.083,2.594 2.448,0.469 10 false No. 2 Exhaust Gas Temperature Sensor (B1S2) 0.24,3.823 1.99,4.083 1.75,0.26 10 false Property of Output Voltage: 1.635,4.156 3.302,4.354 1.667,0.198 10 false Exhaust Gas Temperature 3.417,4.156 3.906,4.396 0.49,0.24 10 false °C (°F) 0.781,4.156 1.583,4.365 0.802,0.208 10 false 1000 (1832) 0.896,4.365 1.604,4.583 0.708,0.219 10 false 960 (1760) 0.896,4.656 1.583,4.896 0.688,0.24 10 false 760 (1400) 0.896,4.885 1.604,5.125 0.708,0.24 10 false 560 (1040) 0.958,5.115 1.583,5.354 0.625,0.24 10 false 360 (680) 0.958,5.354 1.573,5.573 0.615,0.219 10 false 160 (320) 1.01,5.583 1.583,5.823 0.573,0.24 10 false -40 (-40) 1.552,5.708 1.656,5.896 0.104,0.188 10 false 0 1.719,5.708 1.938,5.896 0.219,0.188 10 false 0.2 2,5.708 2.24,5.896 0.24,0.188 10 false 0.5 2.396,5.708 2.635,5.896 0.24,0.188 10 false 1.0 2.844,5.708 3.083,5.896 0.24,0.188 10 false 1.5 3.271,5.708 3.51,5.896 0.24,0.188 10 false 2.0 3.719,5.708 3.958,5.896 0.24,0.188 10 false 2.5 4.167,5.708 4.406,5.896 0.24,0.188 10 false 3.0 4.615,5.708 4.823,5.896 0.208,0.188 10 false 3.5 5.031,5.698 5.24,5.885 0.208,0.188 10 false 4.0 5.458,5.698 5.677,5.885 0.219,0.188 10 false 4.5 5.708,5.698 6.021,5.885 0.313,0.188 10 false 4.95 6.021,5.698 6.25,5.885 0.229,0.188 10 false 5.0 2.635,6.104 5.5,6.417 2.865,0.313 10 false Exhaust Gas Temperature Sensor Voltage (V) 1.917,5.365 3.875,5.625 1.958,0.26 10 false Stores P0545, P2032 or P242C 3.74,4.604 5.698,4.938 1.958,0.333 10 false Stores P0546, P2033 or P242D 4.115,3.271 6.563,3.719 2.448,0.448 10 false No. 3 Exhaust Gas Temperature Sensor (B1S3) 0.188,0.979 1.042,1.458 0.854,0.479 10 false CCo Catalytic Converter

The exhaust gas temperature sensors are installed before and after the DPF catalytic converter to sense the exhaust gas temperature.

A thermistor built into the sensor changes its resistance value according to the exhaust gas temperature. The lower the exhaust gas temperature, the higher the thermistor resistance value. The higher the exhaust gas temperature, the lower the thermistor resistance value.

The exhaust gas temperature sensor is connected to the ECM. The 5 V power source voltage in the ECM is applied to the exhaust gas temperature sensor from terminal THCF, THCI and THCO via resistor R.

Resistor R and the exhaust gas temperature sensor are connected in series. When the resistance value of the exhaust gas temperature sensor changes in accordance with the exhaust gas temperature, the voltage at terminals THTO, THCI and THCO also changes. The exhaust gas temperature sensor monitors the temperature upstream of the DOC catalyst. The No. 2 exhaust gas temperature sensor monitors the temperature upstream of the DPF catalyst. The No. 3 exhaust gas temperature sensor monitors the rise in temperature of the DPF catalyst. When PM forced regeneration is needed, the ECM operates the exhaust fuel addition injector to obtain target upstream temperature of the DPF catalytic converter as monitored through sensor 2. In addition, the ECM monitors the temperature increase of the DPF catalytic converter using sensor 3.

P0545
DTC Detection Drive Pattern DTC Detection Condition Trouble Area
Idle the engine for 3 seconds after warming up the engine (the engine coolant temperature is 60°C (140°F) or higher) and allowing 11 minutes to elapse after starting the engine. Exhaust gas temperature sensor output voltage is below 0.2 V for 3 seconds or more when all conditions are met. (1 trip detection logic):
·

After starting the engine, 11 minutes or more elapses

·

Engine is running

·

Coolant temperature is 60°C (140°F) or more


·

Open or short in exhaust gas temperature sensor circuit

·

Exhaust gas temperature sensor

·

ECM



P0546
DTC Detection Drive Pattern DTC Detection Condition Trouble Area
Idle the engine for 3 seconds after warming up the engine (the engine coolant temperature is 60°C (140°F) or higher) and allowing 11 minutes to elapse after starting the engine. Exhaust gas temperature sensor output voltage is higher than 4.95 V for 3 seconds or more when all conditions are met. (1 trip detection logic):
·

After starting the engine, 11 minutes or more elapses

·

Engine is running

·

Coolant temperature is 60°C (140°F) or more


·

Open or short in exhaust gas temperature sensor circuit

·

Exhaust gas temperature sensor

·

ECM



Related Data List
DTC No. Data List
P0545
P0546
Exhaust Temperature B1S1

HINT:
·

DTC P20CF (Exhaust fuel addition injector malfunction) may be stored if there is an open malfunction in an exhaust gas temperature sensor circuit.

·

Sensor 1 represents the sensor located upstream of the DOC catalytic converter.

·

When DTC P0545 or P0546 is output, check the exhaust gas temperature indicated by "Powertrain / Engine and ECT / Exhaust Temperature B1S1" using the GTS.


Reference:
Condition Exhaust Temperature B1S1 Exhaust Gas Temperature Sensor Condition
Idling after warm-up Constant at between 50 and 700°C (122 and 1292°F) Normal
0°C (32°F) Open circuit
1000°C (1832°F) or higher Short circuit


MONITOR DESCRIPTION

The ECM constantly monitors the output voltages from the exhaust gas temperature sensors in order to detect problems with the sensors. When the sensor output voltage deviates from the normal operating range (between 0.2 V and 4.95 V) for more than 3 seconds after the engine is warmed up, the ECM interprets this as malfunction of the sensor circuit and illuminates the MIL.

WIRING DIAGRAM

A356520E02
5.958,4.385 6.323,4.583 0.365,0.198 10 false ECM 5.552,2.958 5.99,3.156 0.438,0.198 10 false THCO 5.552,3.802 5.99,4 0.438,0.198 10 false ETCO 1.958,3.448 5.156,3.646 3.198,0.198 10 false No. 3 Exhaust Gas Temperature Sensor 5.552,1.729 5.99,1.927 0.438,0.198 10 false THCI 5.552,2.573 5.99,2.771 0.438,0.198 10 false ETCI 2,2.24 5.115,2.438 3.115,0.198 10 false No. 2 Exhaust Gas Temperature Sensor 2.99,0.365 3.552,0.531 0.563,0.167 10 false THC3 5.302,0.583 5.51,0.771 0.208,0.188 10 false 23 2,2.063 2.396,2.25 0.396,0.188 10 false C166 1.958,3.271 2.313,3.448 0.354,0.177 10 false C167 2.115,0.948 4.865,1.146 2.75,0.198 10 false Exhaust Gas Temperature Sensor 2.115,0.792 2.49,0.979 0.375,0.188 10 false C169 3.406,0.573 3.531,0.74 0.125,0.167 10 false 2 2.167,0.563 2.313,0.771 0.146,0.208 10 false 1 5.552,0.49 5.99,0.688 0.438,0.198 10 false THTO 5.552,1.344 6.104,1.542 0.552,0.198 10 false ETTO 2.323,0.375 2.615,0.542 0.292,0.167 10 false E2 5.302,1.406 5.479,1.594 0.177,0.188 10 false 22 5.302,1.802 5.552,1.99 0.25,0.188 10 false 25 5.302,2.656 5.49,2.844 0.188,0.188 10 false 24 5.948,4.229 6.385,4.396 0.438,0.167 10 false C149 5.302,3.021 5.552,3.208 0.25,0.188 10 false 33 5.302,3.885 5.583,4.073 0.281,0.188 10 false 26 3.427,1.813 3.552,1.979 0.125,0.167 10 false 2 2.167,1.802 2.313,2.01 0.146,0.208 10 false 1 2.167,3.042 2.292,3.208 0.125,0.167 10 false 1 3.417,3.042 3.563,3.25 0.146,0.208 10 false 2 3,1.604 3.563,1.771 0.563,0.167 10 false THCI 2.323,1.604 2.615,1.771 0.292,0.167 10 false E2 2.969,2.833 3.531,3 0.563,0.167 10 false THCO 2.333,2.844 2.625,3.01 0.292,0.167 10 false E2

CAUTION / NOTICE / HINT

NOTICE:

After replacing the ECM, the new ECM needs registration (See page Engine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ Urea SCR System)>REGISTRATION) and initialization (See page Engine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ Urea SCR System)>INITIALIZATION).


HINT:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


PROCEDURE

1.READ VALUE USING GTS (EXHAUST TEMPERATURE B1S1)
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG) and turn the GTS on.


c.

Enter the following menus: Powertrain / Engine and ECT / Data List / Exhaust Temperature B1S1


d.

Read the value.

Standard:

Same as the actual exhaust gas temperature (50 to 700°C [122 to 1292°F] during idling after warm-up), and varies after an engine speed of 3000 rpm is maintained for 1 minute.


Result
Temperature Displayed Proceed to
0°C (32°F) (After warming up the engine) A
1000°C (1832°F) or higher B
OK: Same as the actual exhaust gas temperature (50 to 700°C [122 to 1292°F] during idling after warm-up), and varies after maintaining an engine speed of 3000 rpm for 1 minute after accelerating the engine from idling to 3000 rpm C

HINT:
·

If there is a short circuit, the GTS will indicate 0°C (32°F).

·

If there is an open circuit, the GTS will indicate 1000°C (1832°F) or higher.





A

2.READ VALUE USING GTS (CHECK FOR OPEN IN WIRE HARNESS)

B

6.READ VALUE USING GTS (CHECK FOR SHORT IN WIRE HARNESS)

C

11.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
2.READ VALUE USING GTS (CHECK FOR OPEN IN WIRE HARNESS)
a.
U169558E01
0.736,1.724 0.906,1.887 0.170,0.163 10 *1 2.58,1.775 2.760,1.914 0.180,0.139 10 *2 0.337,2.257 0.525,2.410 0.188,0.152 10 *a 1.571,0.652 2.012,0.801 0.441,0.149 10 THC3 1.081,4.104 1.515,4.246 0.434,0.142 10 E2 1.508,2.781 1.997,2.937 0.490,0.157 10 C169 1.599,1.337 1.944,1.486 0.344,0.149 10 E2 1.986,4.104 2.420,4.246 0.434,0.142 10 THC3 1.835,3.57 2.084,4.086 false 1.611,3.575 1.293,4.112 false

Disconnect the exhaust gas temperature sensor connector.


b.

Connect terminals 1 (E2) and 2 (THC3) of the exhaust gas temperature sensor wire harness side connector.


c.

Connect the GTS to the DLC3.


d.

Turn the engine switch on (IG) and turn the GTS on.


e.

Enter the following menus: Powertrain / Engine and ECT / Data List / Exhaust Temperature B1S1.


f.

Read the value.

Standard:

1000°C (1832°F) or higher


Text in Illustration
*1 Exhaust Gas Temperature Sensor
*2 ECM
*a Front view of wire harness connector
(to Exhaust Gas Temperature Sensor)


g.

Reconnect the exhaust gas temperature sensor connector.



OK

3.REPLACE EXHAUST GAS TEMPERATURE SENSOR

NG

4.CHECK HARNESS AND CONNECTOR (EXHAUST GAS TEMPERATURE SENSOR - ECM)
3.REPLACE EXHAUST GAS TEMPERATURE SENSOR

NEXT

11.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
4.CHECK HARNESS AND CONNECTOR (EXHAUST GAS TEMPERATURE SENSOR - ECM)
a.

Disconnect the exhaust gas temperature sensor connector.


b.

Disconnect the ECM connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
C169-2 (THC3) - C149-23 (THTO) Always Below 1 Ω
C169-1 (E2) - C149-22 (ETTO) Always Below 1 Ω



d.

Reconnect the exhaust gas temperature sensor connector.


e.

Reconnect the ECM connector.



OK

5.REPLACE ECM

NG

10.REPAIR OR REPLACE HARNESS OR CONNECTOR
5.REPLACE ECM

NEXT

11.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
6.READ VALUE USING GTS (CHECK FOR SHORT IN WIRE HARNESS)
a.
A188268E23
0.727,0.733 0.971,0.935 0.244,0.202 10 *1 2.566,0.733 2.916,0.937 0.350,0.205 10 *2

Disconnect the exhaust gas temperature sensor connector.


b.

Connect the GTS to the DLC3.


c.

Turn the engine switch on (IG) and turn the GTS on.


d.

Enter the following menus: Powertrain / Engine and ECT / Data List / Exhaust Temperature B1S1.


e.

Read the value.

Standard:

0°C (32°F)



f.

Reconnect the exhaust gas temperature sensor connector.

Text in Illustration
*1 Exhaust Gas Temperature Sensor
*2 ECM


g.

Reconnect the exhaust gas temperature sensor connector.



OK

7.REPLACE EXHAUST GAS TEMPERATURE SENSOR

NG

8.CHECK HARNESS AND CONNECTOR (EXHAUST GAS TEMPERATURE SENSOR - ECM)
7.REPLACE EXHAUST GAS TEMPERATURE SENSOR

NEXT

11.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
8.CHECK HARNESS AND CONNECTOR (EXHAUST GAS TEMPERATURE SENSOR - ECM)
a.

Disconnect the exhaust gas temperature sensor connector.


b.

Disconnect the ECM connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
C169-2 (THC3) or C149-23 (THTO) - Body ground and other terminals Always 10 kΩ or higher



d.

Reconnect the exhaust gas temperature sensor connector.


e.

Reconnect the ECM connector.



OK

9.REPLACE ECM

NG

10.REPAIR OR REPLACE HARNESS OR CONNECTOR
9.REPLACE ECM

NEXT

11.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
10.REPAIR OR REPLACE HARNESS OR CONNECTOR
a.

Repair or replace the harness or connector.



NEXT

11.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
11.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
a.

Connect the GTS to the DLC3.



c.

Start the engine.


d.

Idle the engine for 3 seconds or more after warming up the engine (the engine coolant temperature is 60°C (140°F) or higher) and allowing 11 minutes to elapse after starting the engine.


e.

Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.


f.

Confirm that the DTC is not output again.



NEXT

END