Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ACCELERATOR PEDAL
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260463 ACCELERATOR PEDAL A

1GD-FTV ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 78110K 1.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.


a.
A222078

Disconnect the accelerator pedal sensor connector.


b.

Remove the 2 nuts and accelerator pedal sensor assembly.

NOTICE:
·

Avoid physical shocks to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.