Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › AIR FUEL RATIO SENSOR
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260470 AIR FUEL RATIO SENSOR G

1GD-FTV ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

a.
A332545E02
0.108,0.052 0.342,0.233 0.234,0.181 10 *a 0.89,0.364 1.081,0.545 0.191,0.181 10 +B 0.692,1.63 1.166,1.811 0.474,0.181 10 A1A- 2.344,0.352 2.806,0.534 0.462,0.181 10 HA1A 2.303,1.645 2.718,1.826 0.415,0.181 10 A1A+ 1.965,0.768 2.229,0.435 2.229,0.435 2.297,0.435 false 1.942,1.409 2.183,1.736 2.183,1.736 2.245,1.736 false 1.467,1.421 1.243,1.724 1.243,1.724 1.18,1.724 false 1.473,0.75 1.232,0.447 1.232,0.447 1.169,0.447 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
3(A1A+) - 4(A1A-) Always 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Air Fuel Ratio Sensor)

If the result is not as specified, replace the air fuel ratio sensor.