Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › AIR FUEL RATIO SENSOR
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260470 AIR FUEL RATIO SENSOR A

1GD-FTV ENGINE CONTROL  AIR FUEL RATIO SENSOR  REMOVAL  


PROCEDURE

Hide 53736B 1.REMOVE NO. 1 FRONT FENDER APRON TO FRAME SEAL RH

a.
A353035

Remove the 5 clips and No. 1 front fender apron to frame seal RH.


Hide 89467B 2.REMOVE AIR FUEL RATIO SENSOR

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A353031E01
2.67,0.374 3.076,0.572 0.406,0.198 10 SST 2.61,0.459 2.49,0.459 2.49,0.459 2.035,1.19 false

Disconnect the connector and 2 clamps.


b.

Using SST, remove the air fuel ratio sensor.

SST
09224-00011