Home › Engine / Hybrid System › 5L-E (ENGINE MECHANICAL) › DRIVE BELT
RM27T0E _51 Engine / Hybrid System _053661 5L-E ENGINE MECHANICAL _0260478 DRIVE BELT G

5L-E ENGINE MECHANICAL  DRIVE BELT  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT V BELT

A074147E05
1.313,0.063 1.479,0.229 0.167,0.167 10 false *a 0.594,0.854 0.771,1.021 0.177,0.167 10 false *c 2.344,0.063 2.5,0.229 0.156,0.167 10 false *b

a.

Visually check the belt for cracks, oiliness or wear. Check that the belt does not touch the bottom of the pulley groove.

Text in Illustration
*a CORRECT
*b INCORRECT
*c Clearance

If necessary, replace the belt.


b.
A374957E01
1.229,2.042 1.458,2.042 1.458,2.042 1.656,1.698 true 2.74,1.583 2.792,1.135 2.792,1.135 3.01,1.135 true 3.021,1.01 3.333,1.208 0.313,0.198 10 false *1 1.052,1.927 1.365,2.125 0.313,0.198 10 false *2

Check the vane pump V belt deflection by pressing on the belt at the point indicated in the illustration with 98 N (10 kgf, 22 lbf) of force.

Standard Deflection:
Item Specified Condition
New belt 8 to 10 mm
(0.314 to 0.393 in.)
Used belt 10 to 15 mm
(0.393 to 0.590 in.)


Text in Illustration
*1 Vane Pump Pulley
*2 Crankshaft Pulley
V100135

Measuring Point for Belt Tension

If necessary, adjust the vane pump V belt deflection.



c.

Reference:

Using a belt tension gauge, check the cooler compressor V belt tension.

Standard Tension:
Item Specified Condition
New belt 441 to 539 N
(45 to 55 kgf, 99.1 to 121.2 lbf)
Used belt 196 to 343 N
(20 to 35 kgf, 44.1 to 77.1 lbf)


If the belt tension is not as specified, adjust it.

NOTICE:
·

Check the vane pump V belt tension at the specified point.

·

When installing a new belt, set its deflection value as specified.

·

Perform the V belt tension and deflection value check after idling the engine for a few minutes.

·

When using a belt tension gauge, confirm the accuracy first by using a master gauge.

·

When reinstalling a belt used for over 5 minutes, perform the check based on the used deflection value.

·

When checking a belt used for over 5 minutes, confirm the deflection value is within the specified range.





d.
A374958E01
0.76,0.406 0.906,0.156 0.906,0.156 1.094,0.156 true 1.76,1.719 1.979,2.021 1.979,2.021 2.208,2.021 true 0.5,1.958 0.688,1.958 0.688,1.958 0.833,1.76 true 1.104,0.052 1.417,0.25 0.313,0.198 10 false *1 0.313,1.854 0.625,2.052 0.313,0.198 10 false *2 2.24,1.896 2.552,2.094 0.313,0.198 10 false *3

Check the cooler compressor V belt deflection by pressing on the belt at the point indicated in the illustration with 98 N (10 kgf, 22 lbf) of force.

Standard Drive Deflection:
Item Specified Condition
New belt 11 to 15 mm
(0.433 to 0.590 in.)
Used belt 15 to 20 mm
(0.590 to 0.787 in.)


Text in Illustration
*1 Cooler Compressor
*2 Idle Pulley
*3 Crankshaft Pulley
V100135

Measuring Point for Belt Tension

If necessary, adjust the cooler compressor V belt deflection.



e.

Reference:

Using a belt tension gauge, check the cooler compressor V belt tension.

Standard Tension:
Item Specified Condition
New belt 372 to 608 N
(38 to 62 kgf, 83.6 to 136.7 lbf)
Used belt 196 to 392 N
(20 to 40 kgf, 44.1 to 88.1 lbf)


If the belt tension is not as specified, adjust it.

NOTICE:
·

Check the cooler compressor V belt tension at the specified point.

·

When installing a new belt, set its deflection value as specified.

·

Perform the V belt tension and deflection value check after idling the engine for a few minutes.

·

When using a belt tension gauge, confirm the accuracy first by using a master gauge.

·

When reinstalling a belt used for over 5 minutes, perform the check based on the used deflection value.

·

When checking a belt used for over 5 minutes, confirm the deflection value is within the specified range.





f.
A378613E01
1.698,0.75 1.875,0.479 1.875,0.479 2.094,0.479 true 1.729,1.729 1.885,1.979 1.885,1.979 2.063,1.979 true 0.375,1.594 0.552,1.594 0.552,1.594 0.885,1.333 true 2.115,0.344 2.427,0.542 0.313,0.198 10 false *1 2.083,1.854 2.396,2.052 0.313,0.198 10 false *3 0.167,1.51 0.479,1.708 0.313,0.198 10 false *2

Check the fan and generator V belt deflection by pressing on the belt at the point indicated in the illustration with 98 N (10 kgf, 22 lbf) of force.

Standard Deflection:
Item Specified Condition
New belt 7.0 to 10 mm
(0.276 to 0.393 in.)
Used belt 10 to 14 mm
(0.393 to 0.551 in.)


Text in Illustration
*1 Water Pump Pulley
*2 Generator
*3 Crankshaft Pulley
V100135

Measuring Point for Belt Tension

If necessary, adjust the fan and generator V belt deflection.



g.

Reference:

Using a belt tension gauge, check the fan and generator V belt tension.

Standard Tension:
Item Specified Condition
New belt 441 to 539 N
(45 to 55 kgf, 99.1 to 121.2 lbf)
Used belt 196 to 343 N
(20 to 35 kgf, 44.1 to 77.1 lbf)


If the belt tension is not as specified, adjust it.

NOTICE:
·

Check the fan and generator V belt tension at the specified point.

·

When installing a new belt, set its deflection value as specified.

·

Perform the V belt tension and deflection value check after idling the engine for a few minutes.

·

When using a belt tension gauge, confirm the accuracy first by using a master gauge.

·

When reinstalling a belt used for over 5 minutes, perform the check based on the used deflection value.

·

When checking a belt used for over 5 minutes, confirm the deflection value is within the specified range.