Home › Engine / Hybrid System › 5L-E (ENGINE MECHANICAL) › TIMING BELT
RM27T0E _51 Engine / Hybrid System _053661 5L-E ENGINE MECHANICAL _0260481 TIMING BELT G

5L-E ENGINE MECHANICAL  TIMING BELT  INSPECTION  


PROCEDURE

Hide 13568 1.INSPECT TIMING BELT

A054953E07
1.813,0.417 2.125,0.615 0.313,0.198 10 false *1 2.792,0.208 3.104,0.406 0.313,0.198 10 false *2

NOTICE:
·

Do not bend or twist the timing belt, or turn it inside out.

·

Do not allow the timing belt to come into contact with oil, water or steam.

Text in Illustration
*1 Oil
*2 Water



a.

If there is premature parting:

·

Check for proper installation.

·

Check the timing cover gasket for damage and proper installation.



b.

If the belt teeth are cracked or damaged, check if either camshaft is locked.


c.

If there is noticeable wear or cracks on the belt face, check if there are nicks on the side of the idler pulley lock and water pump.


d.

If there is wear or damage to only one side of the belt, check the belt guide and the alignment of each pulley.


e.

If there is noticeable wear on the belt teeth:

·

Check the timing cover for damage.

·

Check that the gasket has been installed correctly.

·

Check for foreign matter on the pulley teeth.


If necessary, replace the timing belt.


Hide 13505 2.INSPECT NO. 1 TIMING BELT IDLER SUB-ASSEMBLY

A374967E01
2.688,1.76 2.469,1.76 2.469,1.76 2.042,1.417 true 2.708,1.646 3.021,1.844 0.313,0.198 10 false *1

a.

Visually check the seal portion of the No. 1 timing belt idler for oil leakage.

Text in Illustration
*1 Seal
V100135

Turn

If leakage is found, replace the No. 1 timing belt idler sub-assembly.


b.

Check that the No. 1 timing belt idler turns smoothly. If necessary, replace the No. 1 timing belt idler sub-assembly.


Hide 13505A 3.INSPECT IDLER TENSION SPRING

A057636E04
1.604,1.688 1.844,1.896 0.24,0.208 10 false *1

a.

Measure the free length of the tension spring.

Standard free length:

44.4 to 45.4 mm (1.75 to 1.79 in.)


Text in Illustration
*1 Free Length

If the free length is not as specified, replace the idler tension spring.


b.

Measure the tension of the tension spring at the installed length.

Standard tension:

53 to 59 N (5.40 to 6.02 kgf, 11.9 to 13.3 lbf) at 52.1 mm (2.05 in.)


If the installed tension is not as specified, replace the idler tension spring.