11301C
1.INSTALL FRONT CRANKSHAFT OIL SEAL
Apply MP grease to the lip of a new oil seal.
Using SST and a hammer, tap in the oil seal to a depth of 0.5 mm (0.0197 in.) from the oil pump case edge.
13521P
2.INSTALL CRANKSHAFT TIMING PULLEY
Align the key groove of the timing pulley with the pulley set key.
Using SST and a hammer, tap in the timing pulley with the flange side facing inward.
| *a | Inside |
13568
3.INSTALL TIMING BELT
Install the timing belt (See page Engine / Hybrid System>5L-E (ENGINE MECHANICAL)>TIMING BELT>INSTALLATION).