13568
1.REMOVE TIMING BELT
Remove the timing belt (See page Engine / Hybrid System>5L-E (ENGINE MECHANICAL)>TIMING BELT>REMOVAL).
13521P
2.REMOVE CRANKSHAFT TIMING PULLEY
Using a screwdriver, remove the crankshaft timing pulley.
If the timing pulley cannot be removed by using a screwdriver, remove it with SST.
11301C
3.REMOVE FRONT CRANKSHAFT OIL SEAL
Using a knife, cut off the lip of the oil seal.
| *a | Cut Position |
Using a screwdriver, pry out the oil seal.
Do not damage the crankshaft.
Tape the screwdriver before use.