Home › Engine / Hybrid System › 1GR-FE (ENGINE MECHANICAL) › CYLINDER HEAD
RM27T0E _51 Engine / Hybrid System _053662 1GR-FE ENGINE MECHANICAL _0260497 CYLINDER HEAD A

1GR-FE ENGINE MECHANICAL  CYLINDER HEAD  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:

for Automatic Transmission:

Perform "Inspection After Repairs" after replacing the cylinder head sub-assembly or cylinder head LH (See page Engine / Hybrid System>1GR-FE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION).


PROCEDURE

Hide 1.INSTALL STUD BOLT

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.


a.

Using E6 and E8 "TORX" sockets, install the stud bolts.

Torque:
for bolt A : 10 N*m (102 kgf*cm, 7 ft.*lbf)
for bolt B : 4.0 N*m (41 kgf*cm, 35 in.*lbf)

U147576E03
0.531,1.167 0.531,1.635 true 2.771,1.146 2.771,1.604 true 4.052,1.167 4.052,1.625 true 6.25,1.094 6.25,1.552 true 1.719,3.333 1.719,3.479 false 2.104,3.333 2.104,3.479 false 1.302,2.729 1.302,3.469 true 2.125,2.708 2.302,2.865 2.302,2.865 2.302,3.469 true 1.906,3.479 1.906,3.583 false 5.427,3.375 5.427,3.51 false 5.802,3.375 5.802,3.5 false 5.01,2.823 5.01,3.5 true 5.823,2.792 6.042,2.958 6.042,2.958 6.042,3.5 true 5.635,3.51 5.635,3.625 false 1.344,4.844 1.344,5.042 true 1,4.5 1,4.958 1,4.958 1.333,4.958 true 5.677,4.917 5.677,5.146 true 6.01,4.573 6.01,5.042 6.01,5.042 5.688,5.042 true 1.865,5.188 1.74,5.188 1.74,5.188 1.323,5.563 true 1.75,6.479 1.625,6.479 1.625,6.479 1.323,6.094 true 5.781,5.729 5.906,5.344 5.906,5.344 5.979,5.344 true 5.781,6.135 5.979,6.438 5.979,6.438 6.063,6.438 true 0.49,1.646 0.646,1.844 0.156,0.198 10 false A 2.729,1.625 2.885,1.823 0.156,0.198 10 false A 4.01,1.656 4.167,1.854 0.156,0.198 10 false A 6.208,1.594 6.365,1.792 0.156,0.198 10 false A 1.854,3.583 2.01,3.76 0.156,0.177 10 false A 5.594,3.635 5.75,3.813 0.156,0.177 10 false A 1.302,5.042 1.438,5.208 0.135,0.167 10 false B 5.635,5.146 5.76,5.313 0.125,0.167 10 false B 0.854,6.302 1.344,6.51 0.49,0.208 10 false A (M8) 5.333,6.302 5.802,6.5 0.469,0.198 10 false B (M6) 1.875,5.771 2.958,5.969 1.083,0.198 10 false 35 mm (1.38 in.) 1.906,5.104 3.073,5.302 1.167,0.198 10 false 20 mm (0.787 in.) 1.781,6.406 2.979,6.625 1.198,0.219 10 false 13 mm (0.512 in.) 6,5.271 7.104,5.49 1.104,0.219 10 false 16 mm (0.630 in.) 6.344,5.708 6.979,6.094 0.635,0.385 10 false 27 mm (1.06 in.) 6.094,6.365 7.125,6.604 1.031,0.24 10 false 9 mm (0.354 in.) 1.552,0.385 1.781,0.573 0.229,0.188 10 false *A 5.115,0.396 5.344,0.583 0.229,0.188 10 false *B 1.552,2.198 1.781,2.385 0.229,0.188 10 false *C 5.24,2.24 5.469,2.427 0.229,0.188 10 false *D 1.615,3.792 1.844,3.979 0.229,0.188 10 false *E 5.198,3.865 5.427,4.052 0.229,0.188 10 false *F

Text in Illustration
*A Intake Side of RH *B Intake Side of LH
*C Exhaust Side of RH *D Exhaust Side of LH
*E Rear Side of RH *F Rear Side of LH


Hide 11117F 2.INSTALL NO. 2 STRAIGHT SCREW PLUG

a.

Using a 14 mm hexagon wrench, install 2 new gaskets and the 2 No. 2 straight screw plugs.

Torque:
80 N*m (816 kgf*cm, 59 ft.*lbf)


Hide 11117E 3.INSTALL NO. 1 STRAIGHT SCREW PLUG

a.

Using a 10 mm hexagon wrench, install 4 new gaskets and the 4 No. 1 straight screw plugs.

Torque:
44 N*m (449 kgf*cm, 32 ft.*lbf)


Hide 13734 4.INSTALL VALVE SPRING SEAT

a.

Install the valve spring seats to the cylinder head.


Hide 13711E 5.INSTALL VALVE STEM OIL SEAL

a.
A384127E01
0.625,0.708 0.698,0.396 0.698,0.396 0.823,0.396 false 2.479,0.698 2.552,0.385 2.552,0.385 2.677,0.385 false 0.667,1.719 0.979,1.917 0.313,0.198 10 false *A 2.594,1.688 2.906,1.885 0.313,0.198 10 false *B 0.844,0.333 1.156,0.531 0.313,0.198 10 false *1 2.719,0.313 3.031,0.51 0.313,0.198 10 false *2

Apply a light coat of engine oil to new valve stem oil seals.

Text in Illustration
*A Intake Side
*B Exhaust Side
*1 Gray
*2 Black

HINT:

The intake valve oil seals are gray and the exhaust valve oil seals are black.


NOTICE:

Pay attention when installing the intake and exhaust valve stem oil seals. For example, installing the intake valve stem oil seal to the exhaust side or installing the exhaust valve stem oil seal to the intake side can cause installation problems later.



b.
A124592E04
1.026,2.09 1.248,2.270 0.222,0.180 10 *a 2.31,2.09 2.522,2.264 0.211,0.173 10 *b 0.106,0.058 0.877,0.412 0.770,0.354 10 SST 1.409,0.68 0.815,0.144 0.815,0.144 0.484,0.144 false

Using SST, push in the oil seals.

SST
09201-41020  

Text in Illustration
*a CORRECT
*b INCORRECT

NOTICE:

Failure to use SST will cause the seal to be damaged or improperly seated.



Hide 13711 6.INSTALL INTAKE VALVE

a.
A384128E01
1.719,1.656 3.333,1.927 1.615,0.271 10 false 30 mm (1.18 in.) or more

Apply a sufficient coat of engine oil to the tip area of the intake valve shown in the illustration.


b.

Install the intake valve, inner compression spring and valve spring retainer to the cylinder head.

NOTICE:

Install the same parts in the same combination to their original locations.



c.

Using SST, compress the inner compression spring and install the 2 valve spring retainer locks.

SST
09202-70020  (09202-00010)


d.
A221116

Using a plastic-faced hammer, lightly tap the valve stem tip to ensure a proper fit.

NOTICE:

Be careful not to damage the retainer.



Hide 13715 7.INSTALL EXHAUST VALVE

a.
A384129E01
1.729,1.719 3.302,1.958 1.573,0.24 10 false 30 mm (1.18 in.) or more

Apply a sufficient coat of engine oil to the tip area of the exhaust valve shown in the illustration.


b.

Install the exhaust valve, inner compression spring and valve spring retainer to the cylinder head.

NOTICE:

Install the same parts in the same combination to the original locations.



c.

Using SST, compress the inner compression spring and install the 2 valve spring retainer locks.

SST
09202-70020  (09202-00010)


d.
A221115

Using a plastic-faced hammer, lightly tap the valve stem tip to ensure a proper fit.

NOTICE:

Be careful not to damage the retainer.