Home › Engine / Hybrid System › 1GR-FE (ENGINE MECHANICAL) › CYLINDER HEAD
RM27T0E _51 Engine / Hybrid System _053662 1GR-FE ENGINE MECHANICAL _0260497 CYLINDER HEAD A

1GR-FE ENGINE MECHANICAL  CYLINDER HEAD  REPAIR  


PROCEDURE

Hide 11131 1.REPAIR INTAKE VALVE SEAT

NOTICE:
·

Repair the intake valve seat while checking the seating position.

·

Keep the lip free of foreign matter.



a.
A127139

Using a 45° cutter, resurface the valve seat so that the valve seat width is more than the specification.


b.
A384130E01
2.729,1.76 3.042,1.958 0.313,0.198 10 false *1 3.167,0.521 3.427,0.729 0.26,0.208 10 false 30° 3,0.26 3.313,0.469 0.313,0.208 10 false 45° 2.76,0.073 3.073,0.281 0.313,0.208 10 false 60°

Using 30° and 60° cutters, correct the valve seat so that the intake valve contacts the entire circumference of the seat. The contact should be in the center of the intake valve seat, and the intake valve seat width should be maintained within the specified range around the entire circumference of the intake valve seat.

Width:

1.1 to 1.5 mm (0.0433 to 0.0591 in.)


Text in Illustration
*1 Width


c.

Hand-lap the intake valve and intake valve seat with an abrasive compound.


d.

Check the intake valve seating position.


Hide 11135 2.REPAIR EXHAUST VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.



a.
A127140

Using a 45° cutter, resurface the valve seat so that the valve seat width is more than the specification.


b.
A124255E07
2.539,0 2.780,0.160 0.241,0.160 10 60° 2.943,0.088 3.184,0.249 0.241,0.160 10 45° 3.14,0.365 3.381,0.526 0.241,0.160 10 30° 2.841,1.719 3.046,1.916 0.205,0.197 10 *1

Using 30° and 60° cutters, correct the exhaust valve seat so that the exhaust valve contacts the entire circumference of the seat. The contact should be in the center of the exhaust valve seat, and the exhaust valve seat width should be maintained within the specified range around the entire circumference of the exhaust valve seat.

Width:

1.1 to 1.5 mm (0.0433 to 0.0591 in.)


Text in Illustration
*1 Width


c.

Hand-lap the exhaust valve and exhaust valve seat with an abrasive compound.


d.

Check the exhaust valve seating position.