Home › Engine / Hybrid System › 2TR-FE (ENGINE MECHANICAL) › DRIVE BELT
RM27T0E _51 Engine / Hybrid System _053663 2TR-FE ENGINE MECHANICAL _0260499 DRIVE BELT A

2TR-FE ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 16361A 1.REMOVE FAN AND GENERATOR V BELT

a.
A346801

Use the hexagonal part indicated by the arrow in the illustration to move the tensioner pulley downward and decrease the tension in the fan and generator V belt. Then remove the fan and generator V belt.

NOTICE:

When removing the fan and generator V belt, do not use the bolt of the idle pulley.


HINT:

After removing the fan and generator V belt, move the tensioner upward to the maximum amount.



Hide 16603B 2.REMOVE TENSIONER PULLEY

NOTICE:

Perform the following procedure when it is necessary to replace the tensioner pulley.


a.
A346802

Remove the bolt, dust seal and tensioner pulley.