Home › Engine / Hybrid System › 2TR-FE (ENGINE MECHANICAL) › CYLINDER HEAD
RM27T0E _51 Engine / Hybrid System _053663 2TR-FE ENGINE MECHANICAL _0260501 CYLINDER HEAD A

2TR-FE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A333831E01
1.209,0.051 1.520,0.218 0.311,0.167 10 SST 1.811,0.681 1.691,0.141 1.691,0.141 1.584,0.141 false

Using SST and wooden blocks, compress the inner compression spring and remove the valve spring retainer locks.

SST
09202-70020  
09202-00021  


b.

Remove the retainer, inner compression spring and valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13715 2.REMOVE EXHAUST VALVE

a.
A333832E01
1.212,0.023 1.525,0.174 0.313,0.152 10 SST 0.894,0.37 1.079,0.113 1.079,0.113 1.199,0.113 false

Using SST and wooden blocks, compress the inner compression spring and remove the valve spring retainer locks.

SST
09202-70020  
09202-00021  


b.

Remove the retainer, inner compression spring and valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13711A 3.REMOVE VALVE STEM OIL SEAL

a.

Using needle-nose pliers, remove the 16 oil seals.


Hide 13734 4.REMOVE VALVE SPRING SEAT

a.

Remove the 16 valve spring seats from the cylinder head.


Hide 11117E 5.REMOVE NO. 1 HEAD STRAIGHT SCREW PLUG

NOTICE:
A101373

If coolant leaks from the No. 1 head straight screw plug or the plug is corroded, replace it.


a.

Using a 10 mm hexagon wrench, remove the 3 screw plugs and 3 gaskets.


Hide 11117F 6.REMOVE NO. 2 HEAD STRAIGHT SCREW PLUG

NOTICE:
A101374

If coolant leaks from the No. 2 head straight screw plug or the plug is corroded, replace it.


a.

Using a 19 mm hexagon wrench, remove the screw plug and gasket.


Hide 7.REMOVE STUD BOLT

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.