Home › Engine / Hybrid System › 2TR-FE (ENGINE MECHANICAL) › CYLINDER HEAD
RM27T0E _51 Engine / Hybrid System _053663 2TR-FE ENGINE MECHANICAL _0260501 CYLINDER HEAD A

2TR-FE ENGINE MECHANICAL  CYLINDER HEAD  REPAIR  


PROCEDURE

Hide 11131 1.REPAIR INTAKE VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.

·

Take off the cutter gradually to make the intake valve seat smooth.



a.
A110502E11
2.442,1.757 2.681,1.959 0.239,0.202 10 *a 2.371,0.344 2.647,0.542 0.276,0.198 10 45° 3.012,0.866 3.272,1.026 0.260,0.161 10 30°

If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.

Text in Illustration
*a Width


b.
A101380E12
2.429,1.925 2.647,2.102 0.219,0.177 10 *a 2.213,0.479 2.441,0.644 0.228,0.165 10 60° 2.939,1.034 3.200,1.211 0.261,0.177 10 45°

If the seating is too low on the valve face, use 60° and 45° cutters to correct the seat.

Text in Illustration
*a Width


c.

Hand-lap the valve and valve seat with an abrasive compound.


d.

Check the valve seating position.

Standard width:

1.1 to 1.5 mm (0.0433 to 0.0591 in.)



Hide 11135 2.REPAIR EXHAUST VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.

·

Take off the cutter gradually to make the exhaust valve seat smooth.



a.
A110502E12
2.455,1.734 2.694,1.936 0.239,0.202 10 *a 2.371,0.344 2.647,0.542 0.276,0.198 10 45° 3.012,0.866 3.272,1.026 0.260,0.161 10 30°

If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.

Text in Illustration
*a Width


b.
A101380E13
2.429,1.925 2.647,2.102 0.219,0.177 10 *a 2.213,0.479 2.441,0.644 0.228,0.165 10 60° 2.939,1.034 3.200,1.211 0.261,0.177 10 45°

If the seating is too low on the valve face, use 60° and 45° cutters to correct the seat.

Text in Illustration
*a Width


c.

Hand-lap the valve and valve seat with an abrasive compound.


d.

Check the valve seating position.

Standard width:

1.1 to 1.5 mm (0.0433 to 0.0591 in.)