Home › Engine / Hybrid System › 1KD-FTV (ENGINE MECHANICAL) › CYLINDER HEAD › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053664 1KD-FTV ENGINE MECHANICAL _0260517 CYLINDER HEAD A

1KD-FTV ENGINE MECHANICAL  CYLINDER HEAD  REPAIR  


PROCEDURE

Hide 1.REPAIR INTAKE VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.

·

Take off the cutter gradually to make the intake valve seat smooth.



a.
A053831E14
2.917,0.552 3.24,0.76 0.323,0.208 10 false 25° 2.375,0.625 2.698,0.833 0.323,0.208 10 false 45° 2.781,1.698 2.958,1.906 0.177,0.208 10 false *a

If the seating is too high on the valve face, use 25 and 45° cutters to correct the seat.

Text in Illustration
*a 1.2 to 1.6 mm (0.0472 to 0.0630 in.)


b.
A053832E13
2.156,0.208 2.531,0.396 0.375,0.188 10 false 70° 2.854,0.323 3.208,0.51 0.354,0.188 10 false 45° 2.885,1.646 3.063,1.854 0.177,0.208 10 false *a

If the seating is too low on the valve face, use 70 and 45° cutters to correct the seat.

Text in Illustration
*a 1.2 to 1.6 mm (0.0472 to 0.0630 in.)


c.
A059928

Hand-lap the valve and valve seat with an abrasive compound.


d.

Clean the valve and valve seat.


Hide 2.REPAIR EXHAUST VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.

·

Take off the cutter gradually to make the exhaust valve seat smooth.



a.
A053831E15
2.365,0.635 2.719,0.833 0.354,0.198 10 false 45° 2.896,0.51 3.25,0.708 0.354,0.198 10 false 25° 2.813,1.677 2.99,1.885 0.177,0.208 10 false *a

If the seating is too high on the valve face, use 25 and 45° cutters to correct the seat.

Text in Illustration
*a 1.6 to 2.0 mm (0.0630 to 0.0787 in.)


b.
A053832E14
2.156,0.24 2.479,0.438 0.323,0.198 10 false 75° 2.854,0.313 3.177,0.51 0.323,0.198 10 false 45° 2.885,1.656 3.063,1.865 0.177,0.208 10 false *a

If the seating is too low on the valve face, use 75 and 45° cutters to correct the seat.

Text in Illustration
*a 1.6 to 2.0 mm (0.0630 to 0.0787 in.)


c.
A058111

Hand-lap the valve and valve seat with an abrasive compound.


d.

Clean the valve and valve seat.