Home › Engine / Hybrid System › 1KD-FTV (ENGINE MECHANICAL) › CYLINDER BLOCK › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053664 1KD-FTV ENGINE MECHANICAL _0260518 CYLINDER BLOCK A

1KD-FTV ENGINE MECHANICAL  CYLINDER BLOCK  REPAIR  


PROCEDURE

Hide 1.BORE CYLINDER

HINT:
·

Bore all 4 cylinders for the O/S piston outside diameter.

·

Replace all the piston rings with ones to match the O/S pistons.



a.

Prepare 4 new O/S pistons.

Standard Piston Diameter:
Item Specified Condition
O/S 0.50 96.42 to 96.45 mm (3.796 to 3.797 in.)
O/S 0.75 96.67 to 96.70 mm (3.806 to 3.807 in.)
O/S 1.00 96.92 to 96.95 mm (3.816 to 3.817 in.)



b.
A226797E01
1.472,2.466 1.673,2.639 0.201,0.173 10 *3 2.709,2.044 2.900,2.217 0.192,0.173 10 *4 2.084,1.066 1.632,0.562 1.632,0.562 1.531,0.562 false 1.325,0.473 1.494,0.647 0.169,0.173 10 *1 2.821,0.473 3.038,0.643 0.218,0.169 10 *2 2.321,1.166 2.722,0.567 2.722,0.567 2.811,0.567 false 1.564,1.37 1.564,2.453 false

Using a micrometer, measure the piston diameter according to the following conditions: 1) measure at a right angle to the piston center line, and 2) measure at the indicated distance from the piston head.

Standard Distance:

65.00 to 65.006 mm (2.5590 to 2.5593 in.)


Text in Illustration
*1 Size Mark
*2 Piston Pin Hole Inside Diameter Mark
*3 Front Mark (Arrow)
*4 Distance


c.

Calculate how much each cylinder needs to be rebored:

Size to be rebored:

Size to be rebored = P + C - H

P = Piston diameter

C = Piston clearance: 0.07 to 0.09 mm (0.00276 to 0.00354 in.)

H = Allowance for honing: 0.02 mm (0.000787 in.) or less



d.

Bore and hone the cylinders to the calculated dimensions.

Maximum honing:

0.02 mm (0.000787 in.)


NOTICE:

Excess honing will destroy the finished roundness.